Xiaomi Cordless Pressure Washer FAQ
Product Introduction
1.Q:How to install and remove the battery of Xiaomi Cordless Pressure Washer?
A:Installation:
1. Align the "●" mark on the handle with the mark
on the battery pack.
Rotate the battery pack 90° in the direction of the arrow using the "●" mark to align with the
mark. When you hear a click, the battery pack installs securely in place.
Removal: rotate the battery pack 90° in the direction of the arrow, with the "●" mark aligned with the battery pack unlock symbol;Unplug the battery pack downwards
2.Q:How do I remove and install the Soap Holder on the Xiaomi Cordless Pressure Washer?
A:Installation:
1.Align the "●" mark on the soap holder with the "○"mark on the washer handle.
2. Rotate the soap holder 90 degrees as illustrated so that the "●" mark on the soap holder
is aligned with the "●" mark on the handle
Disassembly:
Push the soap holder lock button to the unlocked position.
Rotate the soap holder 90 degrees in the direction of the arrow so that the "●" mark align with the "○" mark on the handle. Pull out the soap holder.
1.Put the water inlet filter head into a bucket and fix it to the edge of the bucket with the hose clamp.
2. Securely attach the hose female connector onto the hose male connector.
Disassembly:Hold and pull the Hose Female Connector downward by hand.
4.Q:How to start Xiaomi Cordless Pressure Washer?
A: On button to the lock: Toggle the on/off button down to the lock mark
to enable the button lock. When it is locked, the motor cannot start working if pressing the on/off button.
Toggle the on/off button to the unlock “
”mark to unlock the button. Toggle the on/off button to start the motor and release the on/off button to stop work.
5.Q:How to add soap powder to Xiaomi Cordless Pressure Washer?
A:1. Unlock and remove the soap holder.
2. Open the soap holder cover, fill the soap powder or liquid into the soap holder, and add an appropriate amount of water according to the ratio of the soap powder or liquid (refer to the instructions of the adopted soap powder or liquid for the ratio).
3. Put back the soap holder cover and shake the prepared soap well.
4. Install the soap holder back into the washer and make sure it is locked.
Cleaning the soap holder: If there is any soap residue on the inside of the soap holder, remove the soap holder to clean it.
6.Q:How to switch Water Output Mode of Xiaomi Cordless Pressure Washer?
A:Directly rotate the multi-function nozzle, and align the “●”mark with the icon to use the corresponding mode. There are 5 water output modes available:
By rotatibng multi-function nozzle, Xiaomi Cordless Pressure Washer is able to switch 5 water output modes, for example, High-pressure mode,0-degree/20-degree/40-degree water mode,Foam/Shower mode.
7.Q:What is Xiaomi Cordless Pressure Washer’s High-pressure mode suitable for?
A:High-pressure mode:It is used to rinse stubborn stains, such as dry stains on the car's surface. It is recommended to spray water continuously in this mode for no more than two minutes.
8.Q:What is Xiaomi Cordless Pressure Washer’s 0/20/40-degree suitable for?
A:The three modes are all used for routine cleaning purposes, such as washing cars, bicycles,
motorcycles, windows, or fences, and only have differences in water spray angles.
9.Q:What is Xiaomi Cordless Pressure Washer’s Foam mode suitable for?
A:The washer working in this mode can spray foam when there is soap in the soap holder, or can be used as a shower when there is no soap.
10.Q:How to switch modes of Xiaomi Cordless Pressure Washer?
A:Xiaomi Cordless Pressure Washer's Multi-Function Nozzle has marked alignment dots and Nozzle markings, rotate the Multi-Function Nozzle to align it, and there is a sense of switching.
11.Q:How to charge Xiaomi Cordless Pressure Washer?
A:Xiaomi Cordless Pressure Washer’s battery pack has Type-C port. Open the cover on the charging port of the battery pack, and connect the Type-C cable to the charging port and a power source.The LED white light of the battery pack blinks when charging. The 4 LEDs are always white when fully charged and go out after 20S. Charging with an adapter of 40W or above, the fastest is about 80 minutes or so full.
12.Q:Does Xiaomi Cordless Pressure Washer support fast charging?
A:It supports PD3.0 charging protocol and 5 input specifications of 5V/2A, 9V/1.5A, 12V/1.5A, 15V/1.5A and 20V/2A.
13.Q:Does the Xiaomi Cordless Pressure Washer need to be charged regularly?
A:If not in use, it is recommended to charge the battery pack once every six months.
14.Q:How can I confirm the battery level of Xiaomi Cordless Pressure Washer?
A:There are buttons on the battery pack. You can press the button to confirm the remaining charge by the 4 LED display.
During Use
battery level 100%: Press the battery level display button, and four indicators will remain
on for 20 seconds and then go off.
75%–100%: Press the battery level display button, the four indicators will remain on for 10 seconds and then go off.
battery level 50%–75%: Press the battery level display button, and three of the four indicators will remain on for 10 seconds and then go off.
battery level 25%–50%: Press the battery level display button, and two of the four indicators will remain on for 10 seconds and then go off.
battery level 0%–25%: Press the battery level display button, and one of the four indicators will remain on for 10 seconds and then go off.
During Charging
battery level 100%: The total four indicators remain on for 20 seconds and then go off.
battery level 75%–100%: Indicators 1, 2, and 3 remain on, and indicator 4 blinks.
battery level 50%–75%: Indicators 1, and 2 remain on, and indicator 3 blinks.
battery level 25%–50%: Indicator 1 remains on, and indicator 2 blinks.
battery level 0%–25%: Indicator 1 blinks.
15.Q:Can I use the Xiaomi Cordless Pressure Washer during charging?
A:It is prohibited to use this product during the charging process.
16.Q:How to clean Xiaomi Cordless Pressure Washer’s Water Inlet Filter Head?
A:Remove the battery pack before servicing and maintenance.
Clean Water Inlet Filter Head：Rotate the water inlet filter head to remove the lower part, then take out the filter for cleaning. A_x001D_er cleaning, put the filter back into the filter head and rotate the filter head to reassemble it, then reaach the hose female connector.
18.Q:Where is Xiaomi Cordless Pressure Washer's SN?
A:Xiaomi Cordless Pressure Washer’s SN is laser engraved on the underside of the quick release coupling.
19.Q:hat is soap/powder and how is it different from car wash?
A:Soap/powder is made from renewable plants and contains active ingredients. The main cleaning ingredients in car wash are also active ingredients extracted from renewable plants. In addition, other different ingredients are added to the car wash to make it have different car wash effects. The main categories are crystal film car wash, super concentrated car wash, water wax car wash, nano car wash, and no wipe car wash, which can be purchased on demand.
Laundry detergent, washing powder, detergent can not be used to clean the vehicle at will, some detergents are alkaline, long-term use will damage the paint surface.
20.Q:What kind of car wash liquid is suitable for Xiaomi Cordless Pressure Washer?
A:Xiaomi Cordless Pressure Washer does not restrict the use of car wash liquids. You can choose the appropriate car wash for your vehicle from a variety of brands through online and offline channels. Just add the liquid and water into the soap holder according to the ratio of the liquid.
23.Q:Why is the Xiaomi Cordless Pressure Washer battery capacity only 2000mAh?
A:Xiaomi Cordless Pressure Washer battery is a 5-section series-connected 18650 cell, the capacity of a single cell is 2000mAh, and the battery component can be separated from the host.
The mAh is the unit of measurement for battery capacity, an indicator of battery performance, and the industry generally uses mAh as the unit when introducing batteries. To know how much energy the battery contains, you need to multiply the battery capacity by the battery voltage to know.
The unit of battery energy is Wh. The Xiaomi Cordless Pressure Washer has a rated voltage of 18V, a battery capacity of 2000mAh, and a battery energy of about 36Wh.
Troubleshooting
1.Q:Why does Xiaomi Cordless Pressure Washer produce water discontinuously?
A:1. There is air in the pump body, you need to turn on the machine and run for about 30 seconds to remove the air.
2.Q:Why the Xiaomi Cordless Pressure Washer starts, but the self-priming function does not work, or the pressure is inadequate?
A:Possible Causes and solutions:
1.The washer is too much higher than the water surface level.
It is suggested to lower the washer, and make sure the distance.
2.The hose female connector connector are poorly and the hose male connected.
It is suggested to connect the hose female connector to the hose male connector properly.
3.The water inlet filter is blocked or not fully submerged in water.
It is suggested to clean the water inlet filter/filter head and fully submerge them in water.
4.The hose is bent or twisted.
It is suggested to straighten the hose.
3.Q:Why Xiaomi Cordless Pressure Washer’s Multi-Function Nozzle leaks water?
A:The nozzle is not fully rotated into place. It is suggested to rotate the nozzle fully into place.
4.Q:Why Water flows out a_x001D_er Xiaomi Cordless Pressure Washer is turned off?
A:There is water residue in the pump after the washer is turned off. It is suggested to drain the water residue before storage.
5.Q:Why there is no soap sprays out when Xiaomi Cordless Pressure Washer at the foam/shower mode?
A: There is no soap in the soap holder. It is suggested to refill the soap.
6.Q:Why Xiaomi Cordless Pressure Washer automatically stops?
A:1.The battery pack is depleted. It is suggested to charge the battery pack before use.
2.The battery pack is too hot, and the overheat protection is enabled. It is suggested to wait for the temperature to drop before turning on the washer.
7.Q:Why the pressure of Xiaomi Cordless Pressure Washer is discontinuous?
A:Air is drawn by the pump.Make sure the hose and the washer are properly connected. Fully submerge the water inlet filter head in water.
8.Q:Why Xiaomi Cordless Pressure Washer doesn't produce water when you just turn it on?
A:1.Make sure Water Inlet Filter Head is connected to the machine in place. When you hear a click and no shaking to make sure that installs securely in place.
2. Press on button, you need to wait for the water from Water Inlet Filter Head sucked into the host about 30s; if in the process, the Water Inlet Filter head leave the water, you need to wait for the water time again;
3. In order to prevent impurities into the machine caused by failure, the end of Water Inlet Filter is equipped with Head; if used in more impurities in the water may be blocked Water Inlet Filter Head, affecting the suction efficiency. It is recommended to avoid using water with more impurities, or clean the Water Inlet Filter Head in time after using water with more impurities.
1.Q:How to install and remove the battery of Xiaomi Cordless Pressure Washer?
A:Installation:
1. Align the "●" mark on the handle with the mark
on the battery pack.Rotate the battery pack 90° in the direction of the arrow using the "●" mark to align with the
mark. When you hear a click, the battery pack installs securely in place.Removal: rotate the battery pack 90° in the direction of the arrow, with the "●" mark aligned with the battery pack unlock symbol;Unplug the battery pack downwards
2.Q:How do I remove and install the Soap Holder on the Xiaomi Cordless Pressure Washer?
A:Installation:
1.Align the "●" mark on the soap holder with the "○"mark on the washer handle.
2. Rotate the soap holder 90 degrees as illustrated so that the "●" mark on the soap holder
is aligned with the "●" mark on the handle
- Push the soap holder lock button forward to lock the parts.
Disassembly:
Push the soap holder lock button to the unlocked position.
Rotate the soap holder 90 degrees in the direction of the arrow so that the "●" mark align with the "○" mark on the handle. Pull out the soap holder.
3.Q:How to install and remove the Xiaomi Cordless Pressure Washer Hose?
A:Installation:1.Put the water inlet filter head into a bucket and fix it to the edge of the bucket with the hose clamp.
2. Securely attach the hose female connector onto the hose male connector.
Disassembly:Hold and pull the Hose Female Connector downward by hand.
4.Q:How to start Xiaomi Cordless Pressure Washer?
A: On button to the lock: Toggle the on/off button down to the lock mark
to enable the button lock. When it is locked, the motor cannot start working if pressing the on/off button. Toggle the on/off button to the unlock “
”mark to unlock the button. Toggle the on/off button to start the motor and release the on/off button to stop work.5.Q:How to add soap powder to Xiaomi Cordless Pressure Washer?
A:1. Unlock and remove the soap holder.
2. Open the soap holder cover, fill the soap powder or liquid into the soap holder, and add an appropriate amount of water according to the ratio of the soap powder or liquid (refer to the instructions of the adopted soap powder or liquid for the ratio).
3. Put back the soap holder cover and shake the prepared soap well.
4. Install the soap holder back into the washer and make sure it is locked.
Cleaning the soap holder: If there is any soap residue on the inside of the soap holder, remove the soap holder to clean it.
6.Q:How to switch Water Output Mode of Xiaomi Cordless Pressure Washer?
A:Directly rotate the multi-function nozzle, and align the “●”mark with the icon to use the corresponding mode. There are 5 water output modes available:
By rotatibng multi-function nozzle, Xiaomi Cordless Pressure Washer is able to switch 5 water output modes, for example, High-pressure mode,0-degree/20-degree/40-degree water mode,Foam/Shower mode.
7.Q:What is Xiaomi Cordless Pressure Washer’s High-pressure mode suitable for?
A:High-pressure mode:It is used to rinse stubborn stains, such as dry stains on the car's surface. It is recommended to spray water continuously in this mode for no more than two minutes.
8.Q:What is Xiaomi Cordless Pressure Washer’s 0/20/40-degree suitable for?
A:The three modes are all used for routine cleaning purposes, such as washing cars, bicycles,
motorcycles, windows, or fences, and only have differences in water spray angles.
9.Q:What is Xiaomi Cordless Pressure Washer’s Foam mode suitable for?
A:The washer working in this mode can spray foam when there is soap in the soap holder, or can be used as a shower when there is no soap.
10.Q:How to switch modes of Xiaomi Cordless Pressure Washer?
A:Xiaomi Cordless Pressure Washer's Multi-Function Nozzle has marked alignment dots and Nozzle markings, rotate the Multi-Function Nozzle to align it, and there is a sense of switching.
11.Q:How to charge Xiaomi Cordless Pressure Washer?
A:Xiaomi Cordless Pressure Washer’s battery pack has Type-C port. Open the cover on the charging port of the battery pack, and connect the Type-C cable to the charging port and a power source.The LED white light of the battery pack blinks when charging. The 4 LEDs are always white when fully charged and go out after 20S. Charging with an adapter of 40W or above, the fastest is about 80 minutes or so full.
12.Q:Does Xiaomi Cordless Pressure Washer support fast charging?
A:It supports PD3.0 charging protocol and 5 input specifications of 5V/2A, 9V/1.5A, 12V/1.5A, 15V/1.5A and 20V/2A.
13.Q:Does the Xiaomi Cordless Pressure Washer need to be charged regularly?
A:If not in use, it is recommended to charge the battery pack once every six months.
14.Q:How can I confirm the battery level of Xiaomi Cordless Pressure Washer?
A:There are buttons on the battery pack. You can press the button to confirm the remaining charge by the 4 LED display.
During Use
battery level 100%: Press the battery level display button, and four indicators will remain
on for 20 seconds and then go off.
75%–100%: Press the battery level display button, the four indicators will remain on for 10 seconds and then go off.
battery level 50%–75%: Press the battery level display button, and three of the four indicators will remain on for 10 seconds and then go off.
battery level 25%–50%: Press the battery level display button, and two of the four indicators will remain on for 10 seconds and then go off.
battery level 0%–25%: Press the battery level display button, and one of the four indicators will remain on for 10 seconds and then go off.
During Charging
battery level 100%: The total four indicators remain on for 20 seconds and then go off.
battery level 75%–100%: Indicators 1, 2, and 3 remain on, and indicator 4 blinks.
battery level 50%–75%: Indicators 1, and 2 remain on, and indicator 3 blinks.
battery level 25%–50%: Indicator 1 remains on, and indicator 2 blinks.
battery level 0%–25%: Indicator 1 blinks.
15.Q:Can I use the Xiaomi Cordless Pressure Washer during charging?
A:It is prohibited to use this product during the charging process.
16.Q:How to clean Xiaomi Cordless Pressure Washer’s Water Inlet Filter Head?
A:Remove the battery pack before servicing and maintenance.
Clean Water Inlet Filter Head：Rotate the water inlet filter head to remove the lower part, then take out the filter for cleaning. A_x001D_er cleaning, put the filter back into the filter head and rotate the filter head to reassemble it, then reaach the hose female connector.
17.Q:How to store the Xiaomi Cordless Pressure Washer for safekeeping?
A:Before storing, please drain the water from the machine and the hose. Please use a soft brush or clean cloth to wipe the machine. Do not use water, solvents or polish. Keep the machine in a safe, dry place away from children. Do not place other objects on the machine. Store the machine and accessories in a frost-proof manner.18.Q:Where is Xiaomi Cordless Pressure Washer's SN?
A:Xiaomi Cordless Pressure Washer’s SN is laser engraved on the underside of the quick release coupling.
19.Q:hat is soap/powder and how is it different from car wash?
A:Soap/powder is made from renewable plants and contains active ingredients. The main cleaning ingredients in car wash are also active ingredients extracted from renewable plants. In addition, other different ingredients are added to the car wash to make it have different car wash effects. The main categories are crystal film car wash, super concentrated car wash, water wax car wash, nano car wash, and no wipe car wash, which can be purchased on demand.
Laundry detergent, washing powder, detergent can not be used to clean the vehicle at will, some detergents are alkaline, long-term use will damage the paint surface.
20.Q:What kind of car wash liquid is suitable for Xiaomi Cordless Pressure Washer?
A:Xiaomi Cordless Pressure Washer does not restrict the use of car wash liquids. You can choose the appropriate car wash for your vehicle from a variety of brands through online and offline channels. Just add the liquid and water into the soap holder according to the ratio of the liquid.
21.Q:Why doesn't the Xiaomi Cordless Pressure Washer come with a charging cable?
A:Xiaomi Cordless Pressure Washer does not come with a charging cable and adapter. You can charge it with your own charging cable and adapter. It is recommended to use a 40W (20V/2A) adapter that supports fast charging protocol and a TypeC cable that supports fast charging protocol with power greater than 40W to achieve the fastest charging efficiency; if you use adapters and charging cables with less than the recommended power, the charging time will be extended accordingly.22.Q:How to buy Xiaomi Cordless Pressure Washer battery?
A:Xiaomi Cordless Pressure Washer's batteries are not available for sale at the moment, if there is any plan to go online in the future, please pay attention on the official website for information. If you need it, you can contact after-sales service to purchase it separately.23.Q:Why is the Xiaomi Cordless Pressure Washer battery capacity only 2000mAh?
A:Xiaomi Cordless Pressure Washer battery is a 5-section series-connected 18650 cell, the capacity of a single cell is 2000mAh, and the battery component can be separated from the host.
The mAh is the unit of measurement for battery capacity, an indicator of battery performance, and the industry generally uses mAh as the unit when introducing batteries. To know how much energy the battery contains, you need to multiply the battery capacity by the battery voltage to know.
The unit of battery energy is Wh. The Xiaomi Cordless Pressure Washer has a rated voltage of 18V, a battery capacity of 2000mAh, and a battery energy of about 36Wh.
Troubleshooting
1.Q:Why does Xiaomi Cordless Pressure Washer produce water discontinuously?
A:1. There is air in the pump body, you need to turn on the machine and run for about 30 seconds to remove the air.
- Water Inlet Filter Head is not completely submerged in the water or the water in the bucket is used up or when water is fed into the bucket the air is sucked in.
2.Q:Why the Xiaomi Cordless Pressure Washer starts, but the self-priming function does not work, or the pressure is inadequate?
A:Possible Causes and solutions:
1.The washer is too much higher than the water surface level.
It is suggested to lower the washer, and make sure the distance.
2.The hose female connector connector are poorly and the hose male connected.
It is suggested to connect the hose female connector to the hose male connector properly.
3.The water inlet filter is blocked or not fully submerged in water.
It is suggested to clean the water inlet filter/filter head and fully submerge them in water.
4.The hose is bent or twisted.
It is suggested to straighten the hose.
3.Q:Why Xiaomi Cordless Pressure Washer’s Multi-Function Nozzle leaks water?
A:The nozzle is not fully rotated into place. It is suggested to rotate the nozzle fully into place.
4.Q:Why Water flows out a_x001D_er Xiaomi Cordless Pressure Washer is turned off?
A:There is water residue in the pump after the washer is turned off. It is suggested to drain the water residue before storage.
5.Q:Why there is no soap sprays out when Xiaomi Cordless Pressure Washer at the foam/shower mode?
A: There is no soap in the soap holder. It is suggested to refill the soap.
6.Q:Why Xiaomi Cordless Pressure Washer automatically stops?
A:1.The battery pack is depleted. It is suggested to charge the battery pack before use.
2.The battery pack is too hot, and the overheat protection is enabled. It is suggested to wait for the temperature to drop before turning on the washer.
7.Q:Why the pressure of Xiaomi Cordless Pressure Washer is discontinuous?
A:Air is drawn by the pump.Make sure the hose and the washer are properly connected. Fully submerge the water inlet filter head in water.
8.Q:Why Xiaomi Cordless Pressure Washer doesn't produce water when you just turn it on?
A:1.Make sure Water Inlet Filter Head is connected to the machine in place. When you hear a click and no shaking to make sure that installs securely in place.
2. Press on button, you need to wait for the water from Water Inlet Filter Head sucked into the host about 30s; if in the process, the Water Inlet Filter head leave the water, you need to wait for the water time again;
3. In order to prevent impurities into the machine caused by failure, the end of Water Inlet Filter is equipped with Head; if used in more impurities in the water may be blocked Water Inlet Filter Head, affecting the suction efficiency. It is recommended to avoid using water with more impurities, or clean the Water Inlet Filter Head in time after using water with more impurities.
Does it help?
Yes
No