How to install the Xiaomi 2K Gaming Monitor G27Qi?
For your reference, the installation methods for the base are as follows:
1. Lock the base and the lower end of the bracket with base screws. After fixing the chassis and pillars, hold them by hand and then tighten the screws to avoid the problem of chassis detachment;
2. Install the assembled bracket into the bracket slot until you hear a click sound, and shake the bracket by hand to ensure proper installation;
Note:
Please make sure to install it properly, otherwise, there will be risks such as the display screen falling off.
3. After installation, the angle of the monitor host's forward or backward tilt can be adjusted according to actual needs.
Note:
When adjusting the forward or backward tilt angle, it is recommended to hold the base with one hand and adjust the monitor with the other hand. If adjusted with only one hand, the monitor is prone to tipping over.
The methods for wall mounting the Xiaomi 2K Gaming Monitor G27Qi are as follows:
1. Place the monitor with the back facing up flat, press the button on the bracket slot, and remove the bracket;
2. Refer to the instructions for using the wall mount (to be purchased separately) to install the wall mount onto the embedded bolt of the rear shell;
Note:
The installation hole distance of the wall mount is compatible with 75 × 75mm.
3. Hang the assembled device on a hard wall.
Note:
1. During the wall mount installation of the device, do not press the screen with your hands to prevent screen breakage;
2. To prevent the monitor from falling off during wall mount use, please install it properly and take appropriate safety precautions;
3. Do not place or hang any items on the wall mount;
4. The height for the wall mount hanging should be within 2 meters.
1. Lock the base and the lower end of the bracket with base screws. After fixing the chassis and pillars, hold them by hand and then tighten the screws to avoid the problem of chassis detachment;
2. Install the assembled bracket into the bracket slot until you hear a click sound, and shake the bracket by hand to ensure proper installation;
Note:
Please make sure to install it properly, otherwise, there will be risks such as the display screen falling off.
3. After installation, the angle of the monitor host's forward or backward tilt can be adjusted according to actual needs.
Note:
When adjusting the forward or backward tilt angle, it is recommended to hold the base with one hand and adjust the monitor with the other hand. If adjusted with only one hand, the monitor is prone to tipping over.
The methods for wall mounting the Xiaomi 2K Gaming Monitor G27Qi are as follows:
1. Place the monitor with the back facing up flat, press the button on the bracket slot, and remove the bracket;
2. Refer to the instructions for using the wall mount (to be purchased separately) to install the wall mount onto the embedded bolt of the rear shell;
Note:
The installation hole distance of the wall mount is compatible with 75 × 75mm.
3. Hang the assembled device on a hard wall.
Note:
1. During the wall mount installation of the device, do not press the screen with your hands to prevent screen breakage;
2. To prevent the monitor from falling off during wall mount use, please install it properly and take appropriate safety precautions;
3. Do not place or hang any items on the wall mount;
4. The height for the wall mount hanging should be within 2 meters.
Does it help?
Yes
No