How to fill the water tank of the Xiaomi Robot Vacuum S20?
1. Press and hold the 2-in-1 water tank release button to remove the water tank;
2. Open the cover of the water tank;
3. Fill the water tank with water until it is below the highest water level;
4. Fasten the water tank cap when finished.
Note:
1. Do not pour hot water into the clean water tank to avoid deformation of the water tank;
2. When the device is mopping the floor, set up a virtual wall or no-go zone around the carpeted area;
3. It is prohibited to use cleaning products such as detergents, disinfectants, and solid cleaning fluids to avoid corrosion and damage to the equipment;
4. If the main unit needs to add water during the cleaning process, you can press any key to pause, take out the 2-in-1 water tank, put it back after completion, and press the start button to continue working;
5. The functions of the device are inspected before leaving the factory, so there would be some water residues in the water tank. This is normal.
2. Open the cover of the water tank;
3. Fill the water tank with water until it is below the highest water level;
4. Fasten the water tank cap when finished.
Note:
1. Do not pour hot water into the clean water tank to avoid deformation of the water tank;
2. When the device is mopping the floor, set up a virtual wall or no-go zone around the carpeted area;
3. It is prohibited to use cleaning products such as detergents, disinfectants, and solid cleaning fluids to avoid corrosion and damage to the equipment;
4. If the main unit needs to add water during the cleaning process, you can press any key to pause, take out the 2-in-1 water tank, put it back after completion, and press the start button to continue working;
5. The functions of the device are inspected before leaving the factory, so there would be some water residues in the water tank. This is normal.
Does it help?
Yes
No