How to connect the Xiaomi Buds 5 to the phone?
The connection steps are as follows:
1. Put the earbuds into the case, open the case lid, and hold the function key for 2 seconds until the light flashes in white. The earbuds are waiting for the connection;
2. Turn on the Bluetooth on your phone, search and connect to the Xiaomi Buds 5 (if the password is required, please enter “0000”);
Note:
If the connection fails, please put the earbuds back into the case, and repeat the above steps.
3. When the device turns off Bluetooth or exceeds the connection range, the Bluetooth is disconnected, and the earbuds will emit a disconnection prompt sound, and then automatically enter the state of waiting connection. If it is not connected to any device within 10 minutes, the earbuds will enter the passive re-connection state, and enter the sleep mode after 10 minutes. It can be awakened by wearing it again and entering the state of waiting connection;
Note:
Passive re-connection means that the earbuds cannot actively reconnect to the device. You need to enter the device’s Bluetooth interface and manually tap the earbuds’ Bluetooth name to reconnect. (The earbuds have a connection record with the device.)
4. With the earbuds in the charging case, open the charging case and the earbuds will automatically reconnect to the most recently connected Bluetooth device. If no connection record is detected, it will enter pairing mode. If it cannot successfully reconnect to any Bluetooth device, the earbuds will enter a state of cannot discovered and cannot connected after 1 minute.
Note:
If the earbuds cannot reconnect to the device, it needs to reconnect manually via the Bluetooth interface.
1. Put the earbuds into the case, open the case lid, and hold the function key for 2 seconds until the light flashes in white. The earbuds are waiting for the connection;
2. Turn on the Bluetooth on your phone, search and connect to the Xiaomi Buds 5 (if the password is required, please enter “0000”);
Note:
If the connection fails, please put the earbuds back into the case, and repeat the above steps.
3. When the device turns off Bluetooth or exceeds the connection range, the Bluetooth is disconnected, and the earbuds will emit a disconnection prompt sound, and then automatically enter the state of waiting connection. If it is not connected to any device within 10 minutes, the earbuds will enter the passive re-connection state, and enter the sleep mode after 10 minutes. It can be awakened by wearing it again and entering the state of waiting connection;
Note:
Passive re-connection means that the earbuds cannot actively reconnect to the device. You need to enter the device’s Bluetooth interface and manually tap the earbuds’ Bluetooth name to reconnect. (The earbuds have a connection record with the device.)
4. With the earbuds in the charging case, open the charging case and the earbuds will automatically reconnect to the most recently connected Bluetooth device. If no connection record is detected, it will enter pairing mode. If it cannot successfully reconnect to any Bluetooth device, the earbuds will enter a state of cannot discovered and cannot connected after 1 minute.
Note:
If the earbuds cannot reconnect to the device, it needs to reconnect manually via the Bluetooth interface.
Does it help?
Yes
No