How to install solar panels on the Xiaomi Outdoor Camera BW300?
To install the solar panels, you can refer to the following steps:
1. Rotate counterclockwise to remove the base;
(1). Locking cap;
(2). Base.
2. Select a suitable installation location (no buildings or trees blocking the installation wall), and then paste the installation template on the flat wall;
3. Drill holes (each hole has a diameter of 6mm and a depth of 30mm) and install the wall plug;
4. Fix the base to the wall with screws;
5. Fix the locking cap on the base;
6. Fix the solar panel on the bracket and adjust the angle to maximize direct sunlight. Then tighten the locking cap;
7. Fully insert the charging connector and waterproof gasket into the camera's Type-C power port.
1. Rotate counterclockwise to remove the base;
(1). Locking cap;
(2). Base.
2. Select a suitable installation location (no buildings or trees blocking the installation wall), and then paste the installation template on the flat wall;
3. Drill holes (each hole has a diameter of 6mm and a depth of 30mm) and install the wall plug;
4. Fix the base to the wall with screws;
5. Fix the locking cap on the base;
6. Fix the solar panel on the bracket and adjust the angle to maximize direct sunlight. Then tighten the locking cap;
7. Fully insert the charging connector and waterproof gasket into the camera's Type-C power port.
Does it help?
Yes
No