How to install the Xiaomi Outdoor Camera BW300?
To install the Xiaomi Outdoor Camera BW300, you can refer to the following steps:
1. Rotate the camera mount counterclockwise to remove the base;
a. Locking cap;
b. Base.
2. Choose a suitable installation location. It is recommended to be 7-10 feet (2-3 meters) above the ground, without buildings or trees blocking the installation wall, and then paste the installation template on the flat wall;
3. Drill holes (each hole has a diameter of 6mm and a depth of 30mm) and install the wall plug;
4. Use screws to fix the base to the wall;
5. Fix the locking cap on the base;
1. Rotate the camera mount counterclockwise to remove the base;
a. Locking cap;
b. Base.
2. Choose a suitable installation location. It is recommended to be 7-10 feet (2-3 meters) above the ground, without buildings or trees blocking the installation wall, and then paste the installation template on the flat wall;
3. Drill holes (each hole has a diameter of 6mm and a depth of 30mm) and install the wall plug;
4. Use screws to fix the base to the wall;
5. Fix the locking cap on the base;
6. Hold the camera with your hands and fix it on the camera mount;
7. Adjust the angle of the camera and tighten the locking cap.
Note:
Please install the camera with the power port facing downwards. When the power supply is not in use, please cover it with a protective cover to prevent water from entering.
Note:
Please install the camera with the power port facing downwards. When the power supply is not in use, please cover it with a protective cover to prevent water from entering.
Does it help?
Yes
No