How to clean and maintain the Xiaomi Smart Dehumidifier Lite?
To clean the device body, please refer to the following steps:
1. Soak the cloth at a temperature below 45 ℃, twist it, and gently wipe the dirty part.
2. Grasp the buckle on the outside of the water tank and pull it out horizontally;
3. Remove the intake grille and then remove the inner air filter;
4. When rinsing or using a vacuum cleaner to clean the filter and inlet grille, if the filter is very dirty (such as oil stains), a soluble and neutral detergent with a temperature below 45 ℃ should be used and then place them in a cool place to air;
5. Install the air filter and reset it, then reinstall the inlet grille and water tank.
Note:
1. Do not directly clean the dehumidifier or use it in places that come into contact with water;
2. Please place the dehumidifier on a stable and level ground, otherwise it will affect the effectiveness of the machine;
3. Please clean the air filter of the dehumidifier regularly. The dirty and clogged filter will cause a decrease in dehumidification efficiency;
4. To better utilize the performance of the dehumidifier, the main unit inlet hole should be kept at a certain distance from walls and other obstructions during use (recommended at above 20 millimeters). Due to it containing a compressor, please allow it to stand for 12 hours before using it.
Please pay attention to when not using the Xiaomi Smart Dehumidifier Lite:
1. After turning off the machine, leave it for a day;
2. Clean the main unit, water tank, and filter regularly;
3. Store the dehumidifier directly in a dry and ventilated place;
4. Please bend the power cord into a roll and tie it with a power cord tie;
5. It is suggested to place the dehumidifier in the packaging bag.
1. Soak the cloth at a temperature below 45 ℃, twist it, and gently wipe the dirty part.
2. Grasp the buckle on the outside of the water tank and pull it out horizontally;
3. Remove the intake grille and then remove the inner air filter;
4. When rinsing or using a vacuum cleaner to clean the filter and inlet grille, if the filter is very dirty (such as oil stains), a soluble and neutral detergent with a temperature below 45 ℃ should be used and then place them in a cool place to air;
5. Install the air filter and reset it, then reinstall the inlet grille and water tank.
Note:
1. Do not directly clean the dehumidifier or use it in places that come into contact with water;
2. Please place the dehumidifier on a stable and level ground, otherwise it will affect the effectiveness of the machine;
3. Please clean the air filter of the dehumidifier regularly. The dirty and clogged filter will cause a decrease in dehumidification efficiency;
4. To better utilize the performance of the dehumidifier, the main unit inlet hole should be kept at a certain distance from walls and other obstructions during use (recommended at above 20 millimeters). Due to it containing a compressor, please allow it to stand for 12 hours before using it.
Please pay attention to when not using the Xiaomi Smart Dehumidifier Lite:
1. After turning off the machine, leave it for a day;
2. Clean the main unit, water tank, and filter regularly;
3. Store the dehumidifier directly in a dry and ventilated place;
4. Please bend the power cord into a roll and tie it with a power cord tie;
5. It is suggested to place the dehumidifier in the packaging bag.
Does it help?
Yes
No