Does the Xiaomi Robot Vacuum X20+ require consumables that need to be replaced regularly?
Regularly replacing consumables such as brushes, filters, and mops on a robot vacuum is important to maintain its cleaning performance and extend its lifespan. Over time, these parts can wear out or become clogged with dirt and debris, reducing the vacuum's effectiveness. By replacing consumables regularly, you can ensure that your robot vacuum continues to clean efficiently and effectively.
Please check the following list of consumables items that need to be maintained and replaced:
1. Dust Compartment: Clean as required;
2. Filter (Pre-installed on the dust compartment): Clean every two weeks. Replace every 3-6 months;
3. Clean water tank: Clean every two weeks;
4. Dirty water tank: Recommended to clean after each use;
5. The cleaning tray: Clean every 1-2 weeks;
6. Brush: Clean every two weeks, replace every 6-12 months;
7. Side Brush: Clean every two weeks, replace every 3-6 months;
8. Mop Pad: Replace Every 3-6 months;
9. Caster Wheel: Clean every month;
10. LDS Laser Sensor: Clean every month;
11. Line Laser Sensor: Clean every month;
12. Cliff Sensor: Clean every month;
13. Robot vacuum’s charging port: Clean every month;
14. Bumper: Clean every month;
15. Auto-empty vents: Clean every month;
16. Bottom of the robot vacuum: Clean every month;
17. Omni station: Clean every month;
18. Omni station power port: Clean every month;
19. Omni station signaling area: Clean every month;
20. Disposable bag: Replace every 2.5 months depending on actual use.
Please check the following list of consumables items that need to be maintained and replaced:
1. Dust Compartment: Clean as required;
2. Filter (Pre-installed on the dust compartment): Clean every two weeks. Replace every 3-6 months;
3. Clean water tank: Clean every two weeks;
4. Dirty water tank: Recommended to clean after each use;
5. The cleaning tray: Clean every 1-2 weeks;
6. Brush: Clean every two weeks, replace every 6-12 months;
7. Side Brush: Clean every two weeks, replace every 3-6 months;
8. Mop Pad: Replace Every 3-6 months;
9. Caster Wheel: Clean every month;
10. LDS Laser Sensor: Clean every month;
11. Line Laser Sensor: Clean every month;
12. Cliff Sensor: Clean every month;
13. Robot vacuum’s charging port: Clean every month;
14. Bumper: Clean every month;
15. Auto-empty vents: Clean every month;
16. Bottom of the robot vacuum: Clean every month;
17. Omni station: Clean every month;
18. Omni station power port: Clean every month;
19. Omni station signaling area: Clean every month;
20. Disposable bag: Replace every 2.5 months depending on actual use.
Does it help?
Yes
No