How to use the Omni station of the Xiaomi Robot Vacuum X20+?
Press and hold the power button on the Xiaomi Robot Vacuum X20+ for three seconds to turn it on. Once the robot vacuum is on, place it onto the Omni station, and make sure the charging contacts on the robot vacuum and the station are fully aligned. The robot vacuum connects to the Omni station successfully when you hear a voice prompt to start charging. Fill the clean water tank with clean water up to the maximum water level mark.
Note:
1. Xiaomi Robot Vacuum X20+ will not be turned off when connected to the Omni station;
2. Do not exceed the maximum (MAX) water level line when filling water;
3. Do not use hot water as it can cause the tank to deform;
4. Do not add any substance like detergents other than clean water to avoid damaging the robot vacuum.
Note:
1. Xiaomi Robot Vacuum X20+ will not be turned off when connected to the Omni station;
2. Do not exceed the maximum (MAX) water level line when filling water;
3. Do not use hot water as it can cause the tank to deform;
4. Do not add any substance like detergents other than clean water to avoid damaging the robot vacuum.
Does it help?
Yes
No