How to install the filter of the Xiaomi Smart Filtered Water Dispenser Pro?
A: To install the filter of the Xiaomi Smart Filtered Water Dispenser Pro, please refer to the following steps:
1. Take out the filter from the packaging and remove the plastic sealing film from the filter element;
2. Align the positioning mark on the filter element with the positioning mark on the body, and gently place it into the corresponding filter barrel;
3. Gently press the filter and rotate the handle of the filter element to the vertical position;
4. When the filter element is in place, its handle points towards the "Lock" direction. Keep the filter's surface flush with the outer surface of the middle frame.
Note:
1. Please refer to the following diagram for installation when installing;
2. Rinse the device and the water tank after replacing the filter.
1. Take out the filter from the packaging and remove the plastic sealing film from the filter element;
2. Align the positioning mark on the filter element with the positioning mark on the body, and gently place it into the corresponding filter barrel;
3. Gently press the filter and rotate the handle of the filter element to the vertical position;
4. When the filter element is in place, its handle points towards the "Lock" direction. Keep the filter's surface flush with the outer surface of the middle frame.
Note:
1. Please refer to the following diagram for installation when installing;
2. Rinse the device and the water tank after replacing the filter.
Does it help?
Yes
No