How to solve the problem that Xiaomi Robot Vacuum S10T cannot connect to WiFi ?

1. Confirm whether the entered WiFi password is correct. The WiFi name or password cannot contain special characters such as @￥%. If so, please reset it to English or the account number and password with numbers and letters and try again;
2. Check whether the external network connection of the router is normal. You can try to open the webpage through your mobile phone or a computer connected to WiFi to see if it is smooth;
3. Confirm whether the distance between the router and the Robot Vacuum is too far (beyond the range of 5 meters or there is a partition in the middle), you can try to move the machine to within 1~2 meters from the router and try to reconnect;
4. Try to connect to the mobile phone WiFi hotspot;
5. Check whether the router is connected to more smart devices, causing the network to slow down or the router to fail to respond. You can try after restarting the router;
6. At present, the company's EAP 802.1x authentication network, 5G signal network or public WiFi network that requires webpage authentication is not supported, such as: CMCC, ChinaUnicom, etc., you need to switch the network again and try to connect;
7. After the network is turned off, if the device has not been connected to the Internet for more than 30 minutes, the WiFi module will turn off the network link function, and the WiFi indicator light will blink at the same time, and the connection can only be restored after restarting the device;
8. Check whether the mobile phone has restricted the permissions of the App, such as networking, positioning, etc., please allow the permissions and try again;
9. The connection failure may also be related to the mobile phone model. You can try to use other different models of mobile phones to try to connect.