What are the functions of Mi Electric Scooter 3 control panel?

Solution:

The icons and functions of the scooter control panel are as follows:

1. Speed meter: it is used to display the current driving speed of electric scooter;When the electric scooter fails, the speedometer shows the fault code.

2. Bluetooth display: The bluetooth icon long bright indicates that the electric scooter has been successfully connected to the mobile device.

3. Lock tip: Determine whether the car is locked through the operation of Mi Home APP.

4. Fault display: The wrench icon flashes to indicate that the scooter is out of order.

5. Battery display: display the remaining battery capacity through 5 bars.Each bar represents about 20 percent of the car's full battery.

6. Power switch: Short press the switch to open the electric scooter; long press the switch for 3s or above to close the electric scooter; in boot state, short press the switch once (to open/close the driving light); continuous short press the switch twice to switch the riding mode.

7. High temperature tip: When the thermometer icon is always on, the battery temperature is not less than 50℃. In this case, the vehicle's acceleration capacity is weakened and it may not be able to be charged.