Solution:
1. If the camera blue light keeps flashing during the initial configuration connection, it means that the camera cannot be connected to the Wi-Fi network. This may be caused by an error in the networking information, which needs to be checked as follows:
① Whether the Wi-Fi password entered correctly;
② Whether the Wi-Fi currently connected to the mobile phone is consistent with the Wi-Fi selected by the camera;
③ Whether the camera is too far away from the wi-fi, try to get close;
④ Whether the wi-fi DHCP service is opened normally (such as using the Mi router to enter the management background > > commonly set > > LAN set > > DHCP service is opened);
⑤ Whether wi-fi turns on the wireless MAC address filtering should be turned off (if you use the Mi route, it is suggested to temporarily turn off the anti-collision network).
⑥ Network restrictions lead to the attempt to connect with other networks (using mobile phones to establish hot spots to connect, but need to ensure that mobile phone data network for 3G and above, and ensure sufficient traffic).
2. If the initial connection has been completed and the blue light flashes during normal use, it indicates that there is something wrong with the network and the following checks should be made:
① Check whether the wi-fi connected to the phone is also unable to surf the Internet. If so, please check the working status of the router at home and the broadband situation.
② If the mobile phone side of the Internet is normal, it may be the wi-fi in the camera is disconnected, or it may be the wi-fi interference or the weak signal caused by the wall, the camera can be close to the wi-fi route;
③ The mobile phone terminal Internet access is normal, the camera is also close to the wi-fi route, but still the blue light flashing, try to restart the Mi Home security camera 360 ° 1080P power;
④ The above ②③ steps operation still cannot be solved, it is suggested to try to reset the camera to reconnect to the Wi-Fi.
Does it help?