Wireless network connection abnormal on the Mi Smart Projector.
If Wireless network connection abnormal on the Mi Smart Projector, please refer to the following troubleshooting steps:
1. Check if Wi-Fi on the projector is turned on by going to [Settings] >> [Network & Internet];
2. Turn off the projector and unplug it from the power source. Turn off the router or modem. Wait a few minutes, then plug in and turn on your router. Plug in your projector and turn it on, then try connecting to the wireless network again;
3. Poor signal strength can cause connection issues. Try moving the projector closer to the router to see if it connects. This might help rule out any signal strength problems;
4. Double-check with the Wi-Fi password is correct. If there's any doubt, try entering the password again carefully, paying attention to uppercase/lowercase characters and any special symbols;
5. If the problem persists, perform a factory reset by navigating to [Settings] >> [Device Preferences] >> [Reset]. Be aware that this will erase all settings and data on the projector;
6. If the above troubleshooting methods can't resolve the issue, please contact local official service center or your seller for further assistance. They will help you in this regard.
1. Check if Wi-Fi on the projector is turned on by going to [Settings] >> [Network & Internet];
2. Turn off the projector and unplug it from the power source. Turn off the router or modem. Wait a few minutes, then plug in and turn on your router. Plug in your projector and turn it on, then try connecting to the wireless network again;
3. Poor signal strength can cause connection issues. Try moving the projector closer to the router to see if it connects. This might help rule out any signal strength problems;
4. Double-check with the Wi-Fi password is correct. If there's any doubt, try entering the password again carefully, paying attention to uppercase/lowercase characters and any special symbols;
5. If the problem persists, perform a factory reset by navigating to [Settings] >> [Device Preferences] >> [Reset]. Be aware that this will erase all settings and data on the projector;
6. If the above troubleshooting methods can't resolve the issue, please contact local official service center or your seller for further assistance. They will help you in this regard.
Does it help?
Yes
No