The suction power of the Xiaomi Truclean W10 Pro Wet Dry Vacuum decreases
If the suction power of the Xiaomi Truclean W10 Pro Wet Dry Vacuum decreases, please refer to the following troubleshooting steps:
1. Dirty or clogged filters can restrict airflow and reduce suction power. Please remove and clean the filter. Check whether the suction port of the floor brush and the pipe of the dirty water outlet are blocked. If so, remove any debris that may be obstructing the airflow;
2. If the dust compartment or dirty water tank is full, it can impede airflow and reduce suction power. Please empty the dust compartment or dirty water tank and ensure that it is properly reinstalled;
3. If the roller brushbar is clogged with hair, strings, or debris, it can affect suction power. Please remove any obstructions and clean the roller brushbar thoroughly;
4. If the battery level is low, the suction power will decrease. Please check the battery level of the device. If the battery level is insufficient, please charge the device for a while and try again;
5. Check the vacuum pipeline and connections for any leaks, cracks, or loose fittings that may be causing air leaks. Tighten connections or replace damaged pipelines as necessary.
If the above troubleshooting methods can’t resolve the issue, please contact our local official service center or your seller for further assistance. They will help you in this regard.
1. Dirty or clogged filters can restrict airflow and reduce suction power. Please remove and clean the filter. Check whether the suction port of the floor brush and the pipe of the dirty water outlet are blocked. If so, remove any debris that may be obstructing the airflow;
2. If the dust compartment or dirty water tank is full, it can impede airflow and reduce suction power. Please empty the dust compartment or dirty water tank and ensure that it is properly reinstalled;
3. If the roller brushbar is clogged with hair, strings, or debris, it can affect suction power. Please remove any obstructions and clean the roller brushbar thoroughly;
4. If the battery level is low, the suction power will decrease. Please check the battery level of the device. If the battery level is insufficient, please charge the device for a while and try again;
5. Check the vacuum pipeline and connections for any leaks, cracks, or loose fittings that may be causing air leaks. Tighten connections or replace damaged pipelines as necessary.
If the above troubleshooting methods can’t resolve the issue, please contact our local official service center or your seller for further assistance. They will help you in this regard.
Does it help?
Yes
No