Xiaomi 10W Wireless Power Bank 10000 FAQ

Q1: What is the Xiaomi 10W Wireless Power Bank 10000?
A: The Xiaomi 10W Wireless Power Bank 10000 is a high-capacity power bank. It uses high-quality lithium-ion polymer batteries and charge-discharge chips, and has outstanding performance in safety, efficiency, and compatibility. Both wireless and wired charging of devices are supported.
Q2: What are the Xiaomi 10W Wireless Power Bank 10000’s package contents?
A: Xiaomi 10W Wireless Power Bank 10000, Charging cable, and User manual. Q3: What material does Xiaomi 10W Wireless Power Bank 10000 use and how much does it weigh?
A: The Xiaomi 10W Wireless Power Bank 10000 shell is made of plastic. The weight of the whole machine is about 240 g. High 10000 mAh capacity housed in a body weighing only 240 g. Q4: Is the Xiaomi 10W Wireless Power Bank 10000 waterproof? A: The Xiaomi 10W Wireless Power Bank 10000 is not waterproof. Please do not use it in wet or wading environments. Q5: Will the Xiaomi 10W Wireless Power Bank 10000 automatically power off after fully charging the phone?
A: The Xiaomi 10W Wireless Power Bank 10000 will not automatically power off after fully charging the phone, and will intelligently charge according to the needs of the phone. Q6: What protocol does each port of the Xiaomi 10W Wireless Power Bank 10000 support?\
A: The USB-A port supports QC3.0, FCP, Apple 2.4, and the Type-C port supports AFC, FCP, QC3.0, PPS. Q7: How does the Xiaomi 10W Wireless Power Bank 10000 enter the low-current discharging mode?
A: In the non-charging state, press the battery check button twice in a row to enter the low-current discharge mode, which can continue to charge low-current devices such as Bluetooth headsets and bands. If you need to exit this mode at this time, just press the battery check button once. The working time is 2 hours each time it enters the low current mode, and it automatically exits this mode after 2 hours. Q8: What is the working temperature of the Xiaomi 10W Wireless Power Bank 10000?
A: The working temperature of the Xiaomi 10W Wireless Power Bank 10000 is 5~35 ℃, and it is normal to have a slight heat during use. Especially in the wireless charging state, the contact surface of the phone and the mobile power supply will generate heat, which is a normal physical phenomenon. Q9: What kind of adapter should be used with the Xiaomi 10W Wireless Power Bank 10000?
A: When powering this product via a charger while simultaneously wirelessly charging other devices, the charger requirements are as follows:
1. When powered by a charger with an output of 5 V/1 A or higher, or a QC2.0 charger, the power bank supports 5 W wireless charging.
2. When using a QC3.0 charger with 9 V/12 V output, the power bank supports 10 W wireless charging.
Q10: Why does the phone heat up when charging with the Xiaomi 10W Wireless Power Bank 10000?
A: 1. Confirm whether there are metal foreign objects on the back of the phone. Metal foreign objects are on the back of the phone. Metal foreign objects will cause the conversion rate of the mobile power supply to be low and cause the phone to heat up. 2. Confirm whether the phone has a protective case. In the state with the protective case, the heating state of the phone will be higher than that without the phone case.
3. If the room temperature or the ambient temperature is high, the heat will be more obvious when the phone is in a wireless charging state. Q11: Why is the Xiaomi 10W Wireless Power Bank 10000 plugged in and charged again after it is fully charged?
A: This is a normal phenomenon. After the power bank is fully charged, it will re-enter the full power judgment mechanism, and the LED light will be on again within about ten minutes, indicating that it is fully charged. Q12: Why does the Xiaomi 10W Wireless Power Bank 10000 stop charging?
A: 1. It may be caused by the USB interface not being plugged in properly. It is recommended to re-plug and unplug the data cable, or replace the data cable for reuse. 2. If the USB-A port is already charging the phone, and the other Type-C port is charging the phone, the original mobile phone will be disconnected, which is normal. 3. During wireless charging, if the charging coil of the phone is not aligned with the center of the wireless charging panel, the charging will also be interrupted. Please adjust the position of the phone until the phone shows normal charging. Q13: Why does the Xiaomi 10W Wireless Power Bank 10000 only charge the iPhone to 80%, or sometimes fail to charge it at all?
A: 1. The iPhone's "Optimized Battery Charging" feature may be enabled. This feature automatically switches to trickle charging once the battery level reaches 80%. Please try disabling this feature and charging again.
2. The iPhone may be overheating due to activities such as playing demanding games, recording video for extended periods, or making long calls while charging. When the iPhone's temperature becomes too high, a protection mechanism is triggered, which may slow down or even stop the charging process.
Q14: Why does the Xiaomi 10W Wireless Power Bank 10000 not blink on the wireless charging indicator?
A: After pressing the button and unplugging the device, the flashing will continue for 25 seconds and then turn off. This is a normal phenomenon. Q15: Why does the Xiaomi 10W Wireless Power Bank 10000 charge the phone so few times that it doesn’t feel like it has 10000 mAh?
A: The number of charging times of the phone depends on the rated capacity of the power bank. The rated capacity of the Xiaomi 10W Wireless Power Bank 10000 is 5600 mAh (5 V/3 A). The calculation method for charging times is as follows: Wired charging: the number of times the phone is charged ≈ the rated capacity of the power bank ÷ the battery capacity of the phone. Wireless charging: the number of times the phone is charged ≈ the rated capacity of the power bank × 0.8 ÷ the battery capacity of the phone.