Mi Bluetooth Speaker Basic 2 FAQ
1. Q：What is the specification of Mi Bluetooth Speaker Basic 2？
A:
| Bluetooth Version | v4.2 |
| Working Range | 10m |
| Frequency Range | 2402MHz—2480MHz |
| Frequency Response Range | 100Hz—18000Hz |
| Protocol | A2DP，AVRCP，HFP |
| Music Playing Time | About 10 hours（40% Power） |
| Rated Power | 2.5W*2 |
| Speaker Impedance | 3Ω |
| Input Power | 5V 1A |
| Dimension | 154.5*60*25.5mm |
| AUX IN | Support |
| Net Weight | 237g |
| Total Weight | 288.5g |
2. Q：What are the standard parts inside the package of Mi Bluetooth Speaker Basic 2？
A:Speaker *1 and Manual *1.
3. Q：What are the power functions of Mi Bluetooth Speaker Basic 2？
A：
| Situation | Power Button | |||||
| Off | Unconnected | Connected | Incoming Call | Calling | AUX-in | |
| Press | - | - | Pause/Resume | Answer | Hang Up | Mute |
| Double-Press | - | - | Disconnect and to pairing mode | - | - | - |
| Hold 2s | - | - | - | Reject | - | - |
| Hold 3s | Boot | Shut Down | Shut Down | - | Shut Down | Shut Down |
| Volume Button | ||||||
| Vol + | Vol - | |||||
| Press | Volume Up | Volume Down | ||||
| Hold | Volume up per 1s until maximum | Mute | ||||
4. Q：What is the meaning of the light difference of the status light of Mi Bluetooth Speaker Basic 2？
A：
| LED Status | Speaker Status |
| Bright Blue | Working / Fully Charged |
| Flashing Red & Blue | Bluetooth Pairing |
| Flashing Red | Battery Level Under 10% |
| Bright Red | Charging |
5. Q：How to connect Mi Bluetooth Speaker Basic 2？
A:Hold the power button about 3 seconds to boot into pairing mode with status light flashing in red and blue; if not， double click the power button to go to pairing mode， then find “Mi Bluetooth Speaker Basic 2” on the Bluetooth searching page of your device， select it to pair and connect.
6. Q：Why Mi Bluetooth Speaker Basic 2 cannot pair with the device？
A:1.Check the battery level first and try to re-connect after fully charge the speaker if battery level is low.
- Check the speaker is at pairin
Does it help?
Yes
No