Mi 16-in-1 Ratchet Screwdriver FAQ

 

 

 

 

A：Mi 16-in-1 Ratchet Screwdriver adopts a 45-tooth high-torque precision pawl with three-position adjustment and a built-in concealed detachable ratchet compartment, which opens and closes with the push of a button.

The magazine opens and closes.

Hold the body of the handle and press the end cap of the magazine, the magazine pops up.

Hold the body of the handle and press the end cap of the magazine, the magazine closes.

Ratchet adjustment.

R: Adjust the ratchet, align the positioning mark with R, turn to R, turn right to tighten the screw, turn left to idle.

Manual: Adjust the ratchet, align the positioning mark with ●, turn to manual, turn right to tighten the screw, turn left to unscrew.

L: Adjust the ratchet, align the positioning mark with L, turn to L, turn left to tighten the screw, turn right to idle.

How to use the extension bar:

Insert the extension bar into the ratchet sleeve of the screwdriver (the extension bar needs to be inserted with force to ensure that the steel ball is pressed into the sleeve)

Batch head storage:

The screw bit is magnetically absorbed into the ejector compartment.

The screw bit can be inserted directly into the screwdriver sleeve, or the screw bit can be inserted into the extension bar and then into the screwdriver sleeve.

 

 

 

❶Sleeve

❷Three gear ratchet

❸Positioning mark

❹Handle body

❺Magazine

❻Magazine end cap

❼Batch head

❽Extension rod

❾Steel ball

 

 

A：Mi 16-in-1 Ratchet Screwdriver comes standard with a 32mm long, C6.3 double-ended head, and can be used with any double-ended or single-ended head of the same type available on the market.

If you encounter a situation where the supplied batch does not fit the screw, you can configure your own batch with the same type of specification, and a single head C6.3 batch with a length greater than 32mm can also be used.

 

A:A chrome vanadium steel and stainless steel extension bar is supplied as standard, with a length of 110mm.

 

A:The end of the hexagonal rod of the extension corresponds to the hexagonal hole in the ratchet spindle and with a little force the hexagonal rod with ball can be pressed into the hexagonal hole of the ratchet.

 

A：The ratchet spindle of the handle and the hexagonal hole of the extension bar have magnets embedded in them, the head is magnetically attached to the extension bar and handle.

 

A：Mi 16-in-1 Ratchet Screwdriver is mainly used for the disassembly of various lamps, furniture and electrical appliances, including tables, chairs, wardrobes, bookshelves, bedside tables and other furniture that require screws, as well as various household appliances such as TVs, air conditioners, microwave ovens, bicycles and other light vehicles.

 

A:The service life depends on the actual usage scenario and intensity of use. The screwdriver is made of high strength material and normal use will not cause damage to the screwdriver. Storage in a dry and ventilated environment, free from moisture and oil, will significantly increase the life of the screwdriver.

 

A:The ratchet head is magnetically attached to the spindle and there is a slight gap between the head and the spindle to ensure easy loading and unloading.