Mi Vacuum Cleaner Mini FAQ

Overview

1.Q: What is a vacuum cleaner?

A： The vacuum cleaner is a device that uses the motor to drive the blade to rotate at a high speed to generate negative air pressure in the sealed shell and absorb dust.Household vacuum cleaner is mainly used to absorb the dust or solid surface, and effectively avoid dust when cleaning, reduce labor force, improve the comfort degree of living environment.

 

Appearance

1.Q: Introduction to the appearance of Mi Vacuum Cleaner Mini.

 

2.Q: Does Mi Vacuum Cleaner Mini need to be charged for the first use?

A: Mi Vacuum Cleaner Mini uses 18650 lithium battery with 2000mAh capacity. Please fully charge the product before using it for the first time or after long-term storage. It is recommended to charge it every 3 months. Please use 5V-2A power adapter (need to be purchased separately) and original Type-C charging cable to charge.

 

3.Q：What’s status of different indicator light？

A：

 

4.Q: How to install the suction head of Mi Vacuum Cleaner Mini?

A：Choose a suitable tip and install it to the interface.

Tip: The two suction heads can be used alone or in splicing.

 

 

5.Q: What are the functions of the power button of Mi Vacuum Cleaner Mini?

A: Press the power button, switch sequentially, turn on (normally low gear operation), high gear, turn off. Note: During use, please make sure that the shrapnel inside the nozzle installation port is not jammed, otherwise the sucked debris may fall out.

 

6. Q: How to maintain Mi Vacuum Cleaner Mini?

A: 1. After pushing down, lightly press the lock, the dust collection cup lid will pop open, and the garbage need to be discharged.

2. Refer to the prompt icon on the back of the fuselage, rotate the dust cup counterclockwise, and then pull it out.

3. Pull out the filter assembly from the bottom of the dust cup.

4. Rotate the filter counterclockwise, and then pull out the filter element.

5. The dust cup, filter screen, filter element, and suction head can be rinsed with clean water, and then put back in order after being completely dried.

Note: The body is not washable and can be wiped with a soft damp cloth. Do not get water into the charging port. The filter element is recommended to be replaced every 3 months.

 

Common problem

1. Q: In what scenes are the different suction heads of Mi Vacuum Cleaner Mini used?

A: 1) Gap suction head: furniture gap, slide rail, window sill corner, car interior, etc;

2) Brush suction head: keyboard, curtain, desktop, coffee table, wardrobe, TV cabinet, car, etc.

 

2. Q: Can Mi Vacuum Cleaner Mini absorb water?

A: No, this product is a dry vacuum cleaner, please do not absorb water.

 

3. Q: What should I do if dust comes out of the suction mouth after Mi Vacuum Cleaner Mini stops working?

A: 1) First of all, please confirm whether the dust baffle completely bounces back and close, and clean the jammed objects;

2) After the dust cup is full, the dust baffle may be stuck, please clean it in time.

 

4. Q: Why does Mi Vacuum Cleaner Mini have a rubbing sound/emergency stop/abnormal noise after it stops working?

A: After stopping working, the motor will have a braking effect, which can control the dust leakage of the dust baffle, and the friction sound is normal.

 

5.Q：Does Mi Vacuum Cleaner Mini’s Filter support water scrubbing?

A：Water washing is supported. The filter can be washed with water, and it is recommended that it should be washed for about 50 times, and should not be soaked; it is recommended that the filter be dried at least 24 hours at normal temperature before installation and use; it is recommended to replace the filter once every three months.

 

6.Q：What should I do if Mi Vacuum Cleaner Mini doesn't work?

A：1.The battery has run out, please try after charging;

2.If the temperature of motor is too high, try to cool it for 5-10min;

3.Trigger speed protection, please clean the dust collection cup and filter components of the Mi Vacuum Cleaner Mini.

 

7.Q：What should I do if the suction power of the Mi Vacuum Cleaner Mini reduce？

A：1.The dust collecting cup is full and the filter is blocked. Clean the dust collection cup and filter components before use;

2.Please buy a new filter to replace it.

 

8.Q：What should I do if my Mi Vacuum Cleaner Mini is slow to charge and can't be charged?

A：Battery temperature is too low or high, please wait for battery temperature to return to normal before charging.

 

9.Q：What to do if the battery life of the Mi Vacuum Cleaner Mini is short?

A：The service time of the machine is about 30 minutes for standard gear and 9 minutes for strong gear;

1： The battery is not sufficient , please try after fully charging;

2.The filter screen is blocked, resulting in high motor speed. Please clean the filter screen;

3.When the ambient temperature is too low or high, the service time will be reduced appropriately.

 

10.Q： How about the suction of Mi Vacuum Cleaner Mini?

A：With a maximum vacuum capacity of 13000Pa, the Mi Vacuum Cleaner Mini has a large suction power in small handy vacuum cleaner, which is sufficient for daily cleaning.

 

11.Q：Why does the Mi Vacuum Cleaner Mini stop running during use? Does it has overheat protection?

A：1.Please check whether the dust collecting cup, filter screen and filter are blocked by dust, and clean them regularly

2.The NTC protection of the machine was started due to too high use environment and long service time,try after static cooling (5-10min);

3.The power is exhausted, please charge it;

4.Mi Vacuum Cleaner Mini has a blocking protection function, long-term blocking of the suction will trigger protection, resulting in the machine to stop working.

 

12.Q: Can it be used when charging?

A：Mi Vacuum Cleaner Mini can't be used when charging. Please use it after fully charged.

 

13.Q：What kind of adapter should be used to charge Mi Vacuum Cleaner Mini?

A：Only 5V-2A adapter is applicable to the Mi Vacuum Cleaner Mini. Please use standard adapter and original type-C for charging.

 

14.Q：Can't Mi Vacuum Cleaner Mini change gears?

A：1.When the power of the machine is low, the red light of LED indicator light will always be on, and it cannot be switched to high gear. Please use it after charging.

2.when the key is short circuited due to water intrusion or too tired , it may also lead to insensitive gear shifting.

 

15.Q：Whether it can be placed in the ambient temperature of the