Calibration of gyroscope sensor/accelerometer
To calibrate the gyroscope sensor/accelerometer of the phone, please refer to the following information:
1. Start the hardware detection (dial interface *#*#64663#*#* or *#*#6484#*#*) and select the gyroscope sensor/accelerometer test.
2. Place the mobile phone flat on the horizontal desktop and click "Start calibration." After the values of X, Y and Z do not change (a little range changes are allowed), click "End calibration."
3. If the X/Y/Z value is empty, unchanged, or cannot be calibrated for another reason, it is suggested to go to after-sales center for inspection.
1. Start the hardware detection (dial interface *#*#64663#*#* or *#*#6484#*#*) and select the gyroscope sensor/accelerometer test.
2. Place the mobile phone flat on the horizontal desktop and click "Start calibration." After the values of X, Y and Z do not change (a little range changes are allowed), click "End calibration."
3. If the X/Y/Z value is empty, unchanged, or cannot be calibrated for another reason, it is suggested to go to after-sales center for inspection.
Note:
Due to differences in specifications, internal hardware varies across different mobile phone models; please refer to the actual product for specific functionality and usage.
Does it help?
Yes
No