Keep warm after pick-up: The water is heated directly to the set warming level, and kept warm at this level. Operation is as follows: 1. After the kettle is filled with water and powered on, press the "keep warm" button, when the screen number flashes, press the "keep warm" button again, you can choose among five keep-warm temperature modes (default 40 ℃, 50 ℃, 70 ℃, 80 ℃, 90 ℃, can be modified in the APP). 70 ° C. 80 ° C. 90 ° C, can be modified in APP) in the choice.2. Selected to a temperature block, no action within 2 seconds, the insulation block is in effect, the kettle began to heat up until the block set temperature.3. The water temperature reaches the block set temperature, issued a "drip drip drip" sound, heat preservation indicator lamp orange long light, began to heat preservation, the default heat preservation 12 hours, can be modified in APP), can be selected in the five keep-warm temperature modes (default 40 ° C. 50 ° C. 80 ° C. 90 ° C, you can modify). Default insulation 12 hours, can be modified in APP (range 1-12h, increase range 0.5h), insulation will enter standby after the end of the state.4. Insulation can be canceled by pressing the "insulation" button again, insulation indicator light off, the kettle enters standby mode.
Note: 1. In standby status, the water temperature is lower than 45 ℃, no operation for 2 minutes will be off screen protection. Press any key, you can wake up the screen.2. Insulation about plus or minus 2 ℃ tolerance.3. If you want to continue to keep warm after pouring water, you need to open the Mi Home App kettle in the "kettle memory keep warm" function.4. Such as heating (not boiled) direct drinking, it is recommended that you use direct drinking water or purified water.
Note: 1. In standby status, the water temperature is lower than 45 ℃, no operation for 2 minutes will be off screen protection. Press any key, you can wake up the screen.2. Insulation about plus or minus 2 ℃ tolerance.3. If you want to continue to keep warm after pouring water, you need to open the Mi Home App kettle in the "kettle memory keep warm" function.4. Such as heating (not boiled) direct drinking, it is recommended that you use direct drinking water or purified water.