Solution:
1. The first way are as follows:
① First press the "home" button of the remote control, then press the "up" button of the remote control to enter the top notification bar;
② Click "Settings"--"Network"--"Wireless network" --select WiFi and then press the "OK button" - through the virtual keyboard input password and click "finish" button.
2. The second way are as follows:
① Press the "home" button of the remote control, and then press the "up" button of the remote control to enter the top notification bar.
② Click the "Settings" button (right "Network disconnected") to enter the setting interface.
③ The "unconnected" position shown in the figure is the "network" option. Select and click the "Ok" key of the remote control to enter the setting interface of network connection.
Note: When not connected to the network, the WiFi icon with an exclamation point can also be seen from the icon in the upper right corner.
④ Click "wireless network" to enter the WiFi setting interface.
⑤ Choose the name of WiFi, and then click the "ok" button of the remote control will pop up the interface of password input.
⑥ Select the corresponding characters of the password, and click "Confirm" on the remote control, the corresponding characters will be displayed in the password input box, and then enter other characters (password at least 8 characters); After entering the password, click "Finish" button in the lower right corner, the system will automatically verify the password and try to connect.
Note: If there is no virtual keyboard in the input field interface, click "Ok" on the remote control and the virtual keyboard will pop up.
⑦ After successful connection, press the "home button" of the remote control to return to the home page. Enter the Settings screen again and then can also see the WiFi name of the connected network.