Xiaomi Automatic Smart Door Lock

Product nameXiaomi Automatic Smart Door Lock
Product dimensions
386x76x21mm (front panel)386x76x24mm (back panel)
Power supply mode:
AA batteries x8 (6V)Type-C emergency power supply (5V)
Product codeXMZNMST02YD
Product net weight2.2kg
Wireless connectionBluetooth 5.0
Operating temperature-25°C–55°C
Operating humidity0–93% RH, non-condensing
Front panel instructions
Password input keypad
Back button
Dual verification
Light on: activated Light off: closed
NFC recognition area
Emergency key cover
Press "*" at the bottom of the cover.
Once the cover pops up, pull it down to reveal the keyhole.
Use the emergency key to unlock the door.
Verification result indicator lamp belt White light on: Verification succeeded Blinking red: Verification failed
Confirm button
Battery alarm Light flashing: Low battery level Light off: Normal
Lock indicator light
Blinking red: Not closed/not locked Blinking white: Door locked
Fingerprint sensing area
Exterior door handle
Push/pull the handle to open the door
Emergency power supply port (Type-C)
Rear panel instructions
Battery compartment AA batteries x8
Settings button
Press and hold for 3 seconds for Bluetooth pairing and to add door lock; short press to enter the local settings mode.
Note: To enter the settings mode, you must add the lock and user to your Mi Home/Xiaomi Home app first.
Interior door handle
Touch the sensor on the inside of the handle without letting go (maintain contact).
Sensor area
Press the unlock button to push or pull the handle to open the door.
Reset hole
Press and hold for 3 seconds to reset the lock.
Lock and verification indicator light
Blinking red: Door not closed well/locked well/verification failed Blinking white: Door locked well Steady white light: Verification successful
Emergency unlock knob
Make sure the knob is turned clockwise or anticlockwise as far as it goes and then push/pull the handle to open the door.
Sensor area
Unlock button
Open the battery cover from here
Electronic double lock button
1. Press and hold for 1.5 seconds to activate electronic double lock; 2. Press and hold for 1.5 seconds to turn off electronic double lock; 3. Electronic double lock status will remain unchanged if you press and hold for less than 1.5 seconds.
Package contents
Front panel x1
Rear panel x1
Lock body x1
Lock cylinder x1
Strike plate x1
Strike box x1
Accessory package x1
Emergency key x2
Installation diagram x1
User manual x1