Xiaomi Insulated Kettle 1.8L FAQ

Q1: What are the features of the Xiaomi Insulated Kettle 1.8L?

A: The Xiaomi Insulated Kettle 1.8L is an indoor-use insulated kettle with long-lasting thermal insulation.
For your reference, here are more detailed selling points:
  1. 1.8L high capacity meets daily water needs;
  2. Multi-layered insulated design, keeping water warm or cold for 24 hours;
  3. 316L food-grade stainless steel interior, more temperature-resistant and corrosion-resistant;
  4. Easy-to-open lid design, easy to open by just pinching and lifting;
  5. Optimized internal water release structure, effortless one-touch opening for graceful pouring;
  6. Hidden silicone base pad, quieter placement and removal;
  7. Lid features a dual pressure release structure for safer use;
  8. Wide kettle mouth design for easy cleaning.
 

Q2: What to pay attention to when using the Xiaomi Insulated Kettle 1.8L for the first time?

A:
  1. Before first use, thoroughly clean the insulated kettle;
  2. The maximum water level should be at least 1cm below the edge of the lid to avoid spillage, which can make clothes dirty or cause burns;
  3. After filling with water, pinch the lid release button and press the lid down until it is flush with the top of the kettle. The lid release button will pop out once released, and ensure it is installed properly;
  4. Reduce the frequency of opening the lid to improve insulation (or cooling) performance;
  5. When not in use for long periods, keep the product clean and dry both inside and out.
 

Q3: Can the Xiaomi Insulated Kettle 1.8L be used to store milk or baby food like rice cereal?

A: It should not be used for long-term storage of dairy products or baby food due to the risk of bacterial growth.
 

Q4: Can the Xiaomi Insulated Kettle 1.8L be heated in a microwave or other heating devices?

A: It cannot be placed in a dishwasher or heated in a microwave, or other heating devices.
 

Q5: How to clean the Xiaomi Insulated Kettle 1.8L?

A: For daily cleaning, use a soft cloth or damp sponge with neutral detergent. Do not use bleach, abrasive powders, metal brushes, stain removers, or chlorine-containing cleaners, as these can scratch the product or cause rust and corrosion.
 

Q6: What is the thermal insulation performance of the Xiaomi Insulated Kettle 1.8L?

A: At a room temperature of 20 ℃ ± 5 ℃, if the kettle is empty and left open for 30 minutes, fill the kettle with 100 ℃ water below the maximum water level, and tighten the lid immediately after the water temperature drops to 95 ℃ ± 1 ℃, then begin timing. The temperature of the water will remain above 75 ℃ after 6 hours and above 65 ℃ after 12 hours.
 

Q7: What is the cold preservation performance of the Xiaomi Insulated Kettle 1.8L?

A: At a room temperature of 20 ℃ ± 5 ℃, if the kettle is empty and left open for 30 minutes, fill the kettle with 0 ℃ water below the maximum water level, and tighten the lid immediately after the water temperature rises to 4 ℃ ± 1 ℃, then begin timing. The temperature of the water will remain below 9 ℃ after 6 hours and below 12 ℃ after 12 hours.
 

Q8: What are the notes of using the Xiaomi Insulated Kettle 1.8L?

A:
  1. Before use, ensure the seal ring is installed correctly to prevent leaks, burns, or reduced insulation performance;
  2. When filling with hot liquids, the maximum water level must be at least 1cm below the lid edge to avoid spills and burns;
  3. Do not use sharp, hard objects for cleaning, and avoid bleach, abrasive powders, stain removers, or chlorine-containing cleaners to prevent rust or corrosion;
  4. Do not steam or boil the kettle or lid, and avoid using it in microwaves, dishwashers, or dryers;
  5. Avoid dropping or impacting the kettle to prevent surface dents that can affect performance. Do not boil the kettle or lid, and avoid using the product in microwaves, dishwashers, or dryers;
  6. Avoid long-term storage of dairy products or baby food to prevent bacterial growth;
  7. Do not place dry ice or carbonated drinks inside to avoid accidental injury;
  8. For liquids like tea, salty soups, or dairy products, finish them as soon as possible and clean the kettle to prevent rust, perforation, or decay;
  9. For oily liquids, finish them as soon as possible and clean the kettle to avoid persistent oil stains;
  10. Do not place the kettle near heaters or stoves to avoid discoloration or deformation;
  11. Keep the kettle out of the reach of children.
 

Q9: What are the notes during the cleaning of the Xiaomi Insulated Kettle 1.8L?

A:
  1. After use, clean the kettle as soon as possible on the same day and let it dry thoroughly;
  2. Use detergents designed for dishware or cooking utensils, and clean with soft sponges or cloths;
  3. To prevent odors, clean the kettle thoroughly.
 

Q10: Why does the Xiaomi Insulated Kettle 1.8L make a pop sound when opening after adding hot water?

A: The pop sound is a normal venting phenomenon due to internal pressure. To avoid burns, press the water dispensing button before opening the lid and pouring out the water.
 

Q11: Why are there black marks on the water dispensing button of the Xiaomi Insulated Kettle 1.8L?

A: The water dispensing button consists of two inlaid parts: an inner layer and an outer layer, which can cause press marks due to contact between the transparent outer surface and rubber. This is normal and does not affect functionality. The marks will disappear after the button is released.
 

Q12: Why is the Xiaomi Insulated Kettle 1.8L not warm insulated?

A: There are two possible reasons: The lid is not properly closed, reducing insulation performance, or the kettle has been dropped or bumped, causing the vacuum layer to fail. To quickly check, pour boiling water into the kettle, wait 3 minutes, and touch the outer surface. If it feels noticeably warm or hot, the vacuum layer is compromised.

Does it help?

Yes
No