What are the precautions about installation environment of the Mijia Front Load Washer Dryer 10.5kg?
The Mijia Front Load Washer Dryer 10.5kg requires a proper power supply, stable water pressure, and a clean, level, well-ventilated environment away from heat sources to ensure safe and efficient operation.
Here are the precautions about installation environment of the Mijia Front Load Washer Dryer 10.5kg for your reference:
Power supply requirements
1. All electrical circuits and grounding must comply with the relevant requirements of national electrical standards;
2. Protect the power cord. Do not place the power cord where it could be stepped on or crushed by other items;
3. Be careful with the power cord, power socket, and where the power cord connects to the washer dryer to prevent electric shock.
Water supply requirements
1. The operating water pressure of the washer dryer is 0.05 MPa to 0.8 MPa. When the water pressure is below 0.05 MPa, the water inlet valve will not let water in, or the water fill time is longer than the program control time and the panel shows [E4];
2. The washing machine should be as close to the tap as possible;
3. Before using the washing machine, check whether all the connections on the water inlet valve and the tap are fastened properly to prevent water leakage.
Installation environment requirements
1. Install on a hard, flat, clean, and level ground free from water and oil. The Mijia Front Load Washer Dryer 10.5kg cannot be placed on a base.;
2. Avoid direct sunlight and ensure good ventilation;
3. Keep away from heat sources such as charcoal fires and gas stoves. Keep away from washing machine that has risk to cause interference, such as induction cookers;
4. The operating ambient temperature of the washing machine is 0°C to 40°C. Do not place it in temperatures below 0°C. There will be residual water in the water valve, drain pump, or water hose of the washing machine.
Note:
If the washing machine is placed in an alcove or closet, the minimum required clearances are 15 mm on each side, 30 mm at the rear, 20 mm at the top, and 550 mm at the front.
Here are the precautions about installation environment of the Mijia Front Load Washer Dryer 10.5kg for your reference:
Power supply requirements
1. All electrical circuits and grounding must comply with the relevant requirements of national electrical standards;
2. Protect the power cord. Do not place the power cord where it could be stepped on or crushed by other items;
3. Be careful with the power cord, power socket, and where the power cord connects to the washer dryer to prevent electric shock.
Water supply requirements
1. The operating water pressure of the washer dryer is 0.05 MPa to 0.8 MPa. When the water pressure is below 0.05 MPa, the water inlet valve will not let water in, or the water fill time is longer than the program control time and the panel shows [E4];
2. The washing machine should be as close to the tap as possible;
3. Before using the washing machine, check whether all the connections on the water inlet valve and the tap are fastened properly to prevent water leakage.
Installation environment requirements
1. Install on a hard, flat, clean, and level ground free from water and oil. The Mijia Front Load Washer Dryer 10.5kg cannot be placed on a base.;
2. Avoid direct sunlight and ensure good ventilation;
3. Keep away from heat sources such as charcoal fires and gas stoves. Keep away from washing machine that has risk to cause interference, such as induction cookers;
4. The operating ambient temperature of the washing machine is 0°C to 40°C. Do not place it in temperatures below 0°C. There will be residual water in the water valve, drain pump, or water hose of the washing machine.
Note:
If the washing machine is placed in an alcove or closet, the minimum required clearances are 15 mm on each side, 30 mm at the rear, 20 mm at the top, and 550 mm at the front.
Does it help?
Yes
No