
Easy ride, endless fun






Agile frame for smooth riding

Minimalist design, redefining urban commutingEvery curve is precision-engineered to be sleek yet robust, with a high-strength carbon structural steel frame that remains stable even with a load of 100kg.4


10" large tires help you to conquer rough or smooth terrain10" pneumatic tires handle gravel, speed bumps, brick roads, grass and mud with ease, delivering a smooth ride and reducing the jolting discomfort caused by small wheels.

25km range for relaxed and effortless journeysEasily covers a variety of daily travel scenarios, weaving through streets and alleys with ease.

travel range 25km5Standard mode at 15km/h,travel range 20kmSport mode at 25km/h,


The 500W Hall-effect brushless motor generates power quickly with just a touch.The 500W motor handles up to 15% inclines making uphill rides a breeze.
Multiple safety features for a safer ride




Dual braking system for fast and stable stoppingA front drum brake and rear E-ABS ensure safe stopping in different road conditions or in an emergency.


IPX4 water resistance for the whole scooter7IPX6 water-resistant battery8

Smart Battery Management System (BMS)6 key safety protections extend battery service life.






Smart riding with control at your fingertips

Switch speeds seamlessly to suit your needs3-speed modes to suit beginners, commuters, or thrill-seekers.




See your vehicle status at a glance in the Xiaomi Home appConnect to the Xiaomi Home app to unlock multiple features and monitor status in real time.






3-step folding for easy carryingFold with one touch for easy carrying and compact storage.





Notes:1. 25km range/standard range: A fully charged scooter tested at an ambient temperature of (25±5)℃, maximum wind speed ≤3m/s, on a flat asphalt or concrete road with a maximum incline of 5%. With a total rider and load weight of 75kg, travelling at a constant speed of 15km/h. When the battery power is too low to maintain the specified speed, the scooter continues at its maximum achievable speed, until it can no longer run.2. 500W peak power: Tested at an ambient temperature of 25±5℃ with the motor fixed to a dynamometer and connected to the scooter controller. Using the maximum current (25A), peak motor power measured was 500W.3. 15% maximum incline: Tested with a total load of 75kg and battery level at 70% (±5%) in an ambient temperature of 15°C–35°C. Starting at 15km/h at the base of a slope, the throttle is fully engaged and the scooter climbs 10m. The rider maintains a stable posture, and a speed above 6km/h at the top confirms effective climbing performance.4. 100kg maximum load: While stationary, a load of 7000N was placed in a 500 x 500mm area on the centre of the scooter deck for 5 minutes with the load evenly distributed across the deck surface. After testing, the scooter functioned normally with no bending, cracking or breakage.5. Range by mode: Measured with a full battery, load of 75±5kg, ambient temperature of 25±5℃, and travelling at maximum speed in each mode on a flat surface. Factors affecting range include speed, load, road conditions, start-stop frequency and ambient temperature.6. 15m illumination range: Tested in a dark room (≤5 lux), the scooter was fixed upright and illumination was measured at four points — A, B, C, and D — with sensors facing the headlight. Measurements were taken at point A, 15m directly in front of the front wheel, at points B and C, 1m to the left and right of point A, and at point D, 1m above point A.7. IPX4 water resistance for the whole scooter: Tested using an oscillating pipe or spray nozzle within a ±180° vertical range with a maximum nozzle distance from the scooter of 200mm. Water flow: 0.07L/min (1±5%) per nozzle for 10 minutes (pipe), or 10L/min (1±5%) for at least 5 minutes (spray).8. IPX6 water-resistant battery: Tested at an ambient temperature of 23℃±2℃. After charging under constant voltage and current conditions and resting for 1 hour, the battery was submerged in 30cm of water for 30 minutes. After testing, the battery showed no signs of water ingress, leakage, gas release, fire or explosion, and the voltage remained above 90% of the pre-test level. The rubber components remained securely attached with no cracking or detachment. Labels showed no deformation, peeling or air bubbles.9. Pedestrian mode: Tested under the same conditions as the maximum speed test, the scooter reached 6km/h.10. Standard mode: Tested under the same conditions as the maximum speed test, the scooter reached 15km/h.11. Sport mode: The scooter accelerated in the auxiliary riding zone, maintaining maximum speed before entering the test zone and passing through the 20m test section (S=20m) at maximum speed. The time (t1) to pass through the speed measurement zone was recorded. The test was repeated in the opposite direction (t2), and the average time was calculated. 2. The time t=(t1+t2)/2 (seconds) was used to calculate maximum speed: V=3.6S/t (km/h). 3. Maximum speed (V) was measured under the following conditions: ① V1: 25℃±3℃, battery SOC=100%, total load 75kg; ② V2: 25℃±3℃, battery SOC=40%±3%, total load 75kg; ③ V3: 25℃±3℃, battery SOC=70%±3%, total load 140kg (declared maximum load); ④ V4: 5℃–10℃, battery SOC=50%±3%, total load 75kg. The scooter was stored in a 5°C test chamber for at least 2 hours (ensuring the battery cell temperature reached 5℃), then ridden immediately with a 75kg load and V4 recorded. The battery temperature shown in the app should be below 10℃; ⑤ V5: Under V4 conditions, riding at maximum speed for 1km, the highest continuously sustainable speed is recorded as V5.*Unless otherwise specified, all data and statistics are tested by the manufacturer. Actual results may vary depending on usage conditions.*Please read the Xiaomi Electric Scooter 6 Essential user manual and legal notice carefully before purchase. Always comply with local laws and regulations when using the scooter.*Although water resistance has been improved, riding in rain or through standing water is not recommended. Water may enter from underneath and damage electronic components. After exposure to water, dry thoroughly with a cloth before use.*Product images are for illustrative purposes only. Actual appearance may vary due to local regulations.


