Xiaomi 12V Max Brushless Cordless DrillPowerful brushless motor with lithium battery
30N·m powerful torque |30-speed precision control
3 operating modes |Smart Display
Freely adjustable speed/torque
Drill/screw with one device
Type-C charging port
Supplied with adaptor in compliance with local standards
Powerful brushless motorStable and reliable performanceElectromechanically integrated design for safe and spark-free operation. Low motor wear, low noise output and high power conversion. No need to replace carbon brushes, resulting in longer service life.
Max torque 30N·m*
Max. speed* 1400rpm*
Long battery life
Smart displayAll-new interactive experienceHigh-resolution display with real-time display of the current operating mode and manual gear speed. Revolutionising conventional tool concepts and keeping the power in your hands.
Manual gear setting
Three-modes switching with one-keyMeet a variety of operating scenariosSwitch between the three operating modes at any time by touching the button at the bottom of the display. From beginners to professionals, from casual to renovation, meets the needs of different groups of people in a variety of scenarios with one click.
A Automatic Smart Mode
M Manual Mode
M Manual ModePrecise 30-stage gear adjustment360° infinite knob with up to 30 gear stages, which can be adjusted incrementally or by rotating quickly through the gears. Depending on the drilling/screwing mode, the maximum torque or speed can be controlled separately for precision and accuracy to meet the advanced needs of professional users.
Drilling Mode30-speed incremental adjustment of the maximum speed
Screwdriving Mode30-speed incremental adjustment of the torque output
A Automatic SmartModeSmooth & Worry-free automatic torque detectionThe built-in smart chip automatically matches the appropriate torque to the application scenario. Screwdriving mode automatically locked after tightening , avoiding breakage or cracks due to over-turning.
Safe pulseModeEasy control of intermittent starting and stoppingThe safe-pulse mode is more suitable for beginners, thanks to embedded intelligent speed control chip. Plus, the intermittent rotation start/stop ensures safety operation. It also effectively minimises damage to the soft material .
Drilling SpeedTime* Speed variations are shown in the figure
Suitable for a variety of materialsAdapting multiple operation scenarios and a wide range of applicationsEffortless screw/ drilling on woods such as soft pine and hard beech, metals such as aluminium tubes and steel plates, and plastics such as water pipes and acrylic.* Not suitable for use on concrete
Walls (* Non-load-bearing walls)
Aluminium alloy extrusions
Drilling/screwdriving ModesMultiple Functions & Easy-SwitchingEasily switch between drilling and screwdriving mode with a single push and twist. The built-in all-metal variable speed gearbox meets the needs of different speeds in a variety of usage scenarios..
Infinite gear switchingSlow-stop on release to enhanced safetyInfinitely variable trigger, the speed gradually increases with the pressing force. The slow-stop design can protect the user in high torque mode.
Minimalist screwless designA modern take on traditional tool designIn keeping with the minimalist design of Xiaomi screwdrivers, the body has smooth lines and no visible screws on the surface. The grip is designed to fit perfectly in your hand for a more comfortable and safe operation.
Sophisticated surface finishesDesigned for more comfortable gripThe metal coating and UV topcoat create a high-quality matt metallic finish that is scratch and stain-resistant. The entire device is made of PC+ABS high-strength engineering plastic, which is robust and durable. The front of the grip is covered with matt TPU soft rubber for a comfortable, non-slip feel and is not prone to the usual yellowing and stickiness.
Cordless, portable designLarge capacity and long battery lifeBuilt-in 2000mAh high-quality lithium battery with a capacity of 550+ self-tapping screws* on a full charge. The innovative battery design eliminates the need for additional bulky battery packs.
22+ Successive penetrating into 6mm steel plates*
280+ Successive drilling of 4cm-deep holes on wooden board*
Extensive testing for guaranteed quality
Comprehensive product safety tests Heat and flame resistanceDurabilityAbnormal operationMechanical strengthStructureInternal wiringScrews and connectionsProtection against contact with live partsHeat generation
Safety requirements for battery protection circuitOvervoltage charging protectionOvercurrent charging protectionOverload protectionShort-circuit protection
Screwdriver bit testsNeutral salt spray (NSS) test (10h salt spray anti-rust test)Magnetic test (magnetic attraction with 18mm steel ball)Surface qualityHardness test
RoHS testRoHS tested to national standardsTSCATPCHCE RoHSREACH
Safety testTemporary voltage drops and short-term interruptionImmunity testElectrical fast transient/burst (EFT/B) immunitySurge (impact) immunity testElectrostatic discharge (ESD) immunityRadiated electromagnetic field immunityCE safety CE EMC FCC
Environmental reliability test Low-temperature test (48h at -20°C, normal operation after returning to room temperature) High-temperature operation (2h at 40°C)High-temperature test (48h at 70°C, normal operation after returning to room temperature)Low-temperature operation (2h at -10°C)Constant temperature and humidity test (24h at 40°C and 93%RH, normal operation after returning to room temperature)Rapid change temperature and humidityThermal shock test (3h at -20°C → 3h at 60°C for 8 cycles)
Safety requirement tests for lithium-ion batteries and battery packsExternal short-circuit at room temperatureExternal short-circuit at high temperature (55℃)OverchargingForced dischargeLow pressure (simulated altitude of 15,240m for 6h)Temperature cycling (6h at 72°C–6h at 40°C for 10 cycles)VibrationAcceleration impactDropHeavy weight impactThermal abuse (heating to 130°C at 5°C/min)Flame spraying (heating the battery with a flame until it burns completely without exploding)Operation at high temperatureCB Scheme test Electromagnetic compatibility (EMC) test
* Not all tests are listed in the chart; for reference only.
Universal Type-C charging portRapid charge adaptor for charging at any timeSupplied with a 1m Type-C rapid charging cable and charging adaptor, with a universal Type-C charging port for convenient charging at any time.
Wide range of accessoriesIdeal for most operational requirements24 different types of S2 steel bits in 9 common categories, hardened to a maximum of 60HRC* for toughness and durability.The 60mm magnetic extension rod covers a wide range of applications.Eight different sizes of woodworking bits and metal twist drills meet the requirements for drilling a wide range of materials.Wood drill bitsMetal drill bits
Water-repellent storage pouch*Simple and compact designThe portable storage pouch is made of water-repellent fabric. The main unit, accessory case, adaptor and charger can all be stored in the bag, so you can easily and conveniently carry them all with you.
Old and new extension rod designsShipped at randomExternal changes to the productOld designNew designThis update does not affect the quality of the product or the effectiveness of its use. Please be assured when purchasing that both extension rod designs are genuine accessories.
* The maximum torque error is ±5Nm due to the measurement device used. Torque test method: With the battery fully charged, the function selection button is pushed to enter screwing mode. A torque tester is then used to test the locked-rotor torque at level 30.* No-load speed tolerance is approximately 10%. Speed test method: The fully charged device is run for 2 minutes at no load and the no-load speed is then tested with a speed tester.* Screwing test method: With the device fully charged, the gearbox is adjusted to low speed (screwing mode). In manual "M" mode, the tail torque is adjusted to 10 and an M4 x 25mm self-tapping screw is screwed into the pine board until the battery runs out.*Steel plate drilling test method: With the device fully charged, the gearbox is adjusted to the high-speed setting (drilling mode). In M mode, the tail torque is adjusted to 30 and a hole is drilled into a 6mm-thick steel plate with a 6mm twist drill.*Wooden board drilling test method: With the device fully charged, the gearbox is adjusted to the high-speed setting (drilling mode). In M mode, the tail torque is adjusted to 30 and a 40mm-deep hole is drilled into a white pine board with a 7mm wood bit.*The whole unit compliance test report was issued by Waltek Services Test Group Ltd. in Foshan; Test Report No.: WTF21F3015226G.*The whole unit ROHS test report was issued by EMTEK (Dongguan) Technology Co., Ltd.; Test Report No.: ED201110010C.*The EMC test report was issued by EMTEK (Shenzhen) Co., Ltd.; Test Report No.: ES201110017E.*The environmental reliability test report was issued by Intertek Shenzhen Ltd.; Test Report No.: SZHH01513728.*The battery test report was issued by Precise Testing & Certification (Guangdong) Co., Ltd.; Test Report No.: PTC20110204401S-GB01.The screwdriver bit test report was issued by the National Light Industry Tool Hardware Quality Supervision & Testing Station, Shanghai. Test Report No.: G20201629F. Hardness varies by ±2HRC.* Two extension rod designs are available and will be shipped randomly.* The water-repellent fabric test was conducted by Centre Testing International Co., Ltd. and is waterproof up to class 4–5; Test Report No.: A2210085110101C.