Mijia Top Load Washer 13kg Specs

    Product dimensions
    Installation requirements
    Installation guide
    To ensure safe and reliable use of your washing machine, please make sure the following conditions are met before installation.
    1. Installation environment
    Ensure sufficient installation space, and place the machine near a power source, water inlet and floor drain.
    Measure your door frame size to ensure the washing machine fits through the doorway without obstruction.
    Install the machine in a dry, indoor area, away from direct sunlight. Ensure good ventilation and maintain an ambient temperature between 0°C and 40°C.
    Do not place the washing machine on a platform or stand, as vibrations during spinning may cause displacement.
    Install on a flat, hard surface. Adjust and lock the levelling feet securely. After levelling, avoid moving the machine; if moved, re-level before use.
    2. Electrical safety
    Do not use a multi-outlet power strip without an independent switch for each outlet to power multiple appliances simultaneously.
    The power supply must be properly grounded. The washing machine requires a minimum current of 10A.
    3. Water inlet precautions
    For easy connection, the water tap should be located above the machine or on its lower left or right.
    Water pressure should be between 0.05MPa and 0.8MPa. If the pressure is below 0.05MPa, the inlet valve may not fill water properly or the filling time may exceed the programmed duration.
    To ensure the inlet hose connections remain tight and do not loosen, connect the hose first to the tap, then to the machine.
    Keep the area in front of the tap clear to allow easy operation of the tap.
    Do not connect to a hot water supply.
    4. Drainage precautions
    Do not loosen or cut the specially shaped fixing screws or clamps on the drain hose to ensure it stays securely fixed and prevent simultaneous water intake and drainage.
    The drain hose on the drum should be positioned below 1 meter in height; higher placement may lead to poor drainage.
    The drain hose must not be submerged in water to prevent drainage issues or siphoning.
    When using an extended drain hose, the total length should be less than 2.5 meters to prevent drainage issues or siphoning.
    Specifications
    Product modelTW130MJA08MY
    ColorWhite
    Rated washing capacity13kg
    Spin speed680rpm
    Net weight39kg
    Gross weight44kg
    Rated washing power input650W
    Product dimensions (W x D x H)580 X 615 X 925 mm
    Rated voltage220-240V~
    Rated frequency50Hz
    Operating water pressure0.05MPa-0.8MPa
    Package contents
    User manual
    Water inlet hose
    Base plate
    Screws