Lock in fine dust for cleaner air

High-density filterFurther filters particles down to micron level

High-performance, high-density filter meshFilters for cleaner airPowerful filtration captures particles down to the micron level, reducing secondary pollution.¹

Pleated designReduced airflow resistance, enhanced dust captureThe pleated filter design effectively reduces airflow resistance, allowing air to pass through more efficiently while trapping fine dust to ensure high-efficiency filtration.

Washable filter components for easier maintenanceRinse the filter with water, do not soak. Allow it to dry completely before reinstalling. It is recommended to replace the filter every 3 months.

Sponge and filter installation

Step 1: Press the dust compartment release button and rotate the dust compartment to the unlock position. Remove the dust compartment assembly.

Step 2: Pull the silicone tab on the filter to remove the filter and sponge.

Step 3: Install the new filter and sponge in the order shown.

See specs

Notes:1. Micron-level: Tested by Suzhou GTT Service Co., Ltd. Overall filtration efficiency exceeds 99.5%, with a filtration efficiency of 99.9% for particles measuring 0.3–10μm. Actual results may vary depending on usage conditions. Report No.: 0363-25A-02.*This filter is an accessory for Mijia Car Vacuum Cleaner. It must be used with the vacuum cleaner and cannot be used independently.*The terms "Sponge" and "Filter" are generic names for Mijia Car Vacuum Cleaner replacement accessories. They apply only to the Mijia Car Vacuum Cleaner and do not indicate compatibility with products from any other brand.