Effortless drilling and screwing
Efficient and labour-saving brushless motor
Strong power, durable performance
High-carbon steel planetary gearbox
Heavy-duty work made easy
Ultra-long battery life for extended use
Drill up to 200 holes on a full charge1
Upgraded drill and screwdriver bits
A variety of sizes for versatile home use
Self-locking chuck for stability and safety
Drill and screwdriver bits are held tightly in place
32 torque levels for a wide range of tasks
Precise torque and speed control
Exceptional performance
Built to conquer multiple challenges
High-performance brushless motor
More power, less work
Equipped with a high-performance brushless motor, it operates smoothly and efficiently, with fast and responsive performance that easily adapts to a variety of usage scenarios.
Planetary gear system for improved load-bearing capacity and durability
Handles heavy-duty, high-frequency drilling and screwing tasks with ease.
Maximum output torque2
50
N·m
Approximately 66% increase from the previous model4
Maximum speed3
1,700
rpm
Approximately 21% increase from the previous model5
1,900mAh high-capacity battery pack6
Extra-long battery life for your peace of mind
On a full charge, it can insert up to 600 screws and drill up to 200 holes.7
One-touch smart drilling or screwing
Designed for convenient, hassle-free use
Multiple mode selection
Meets various drilling and screwing needs
High-speed mode
Low-speed mode
Manual mode
Automatic mode
32 torque levels for fine-tuned adjustments
Precise control over drilling and driving force
From tightening screws to drilling into walls, change modes with the flick of a switch to meet a variety of household needs.
Level
1–20
Tighten or loosen screws
Level
21–32
Precision hole drilling
Smart automatic mode for adaptive force
One-touch operation makes it easy for beginners
The built-in smart chip automatically adjusts the torque, while one-touch control prevents screw damage from over-tightening, making it easy for anyone to get started.8
Versatile accessories
Hassle-free attachment and removal
Drill bits for various materials
An 8mm alloy multi-purpose drill bit for wood, plastics, thin metal and light concrete. A 6mm multi-functional ceramic drill bit for ceramic tiles, red brick and plastics, and 4/6/8mm wood drill bits for woodworking.9
Works well in dry or wet conditions
Designed for use with common household materials
Walls
(Non-load-bearing)
Hollow aluminium alloy pipes
PVC pipes
Dry drilling
Ceramic tiles
Marble
Cement boards
Wet drilling10
Multiple bits for versatile assembly and disassembly
Suitable for various tasks, both small and large
Magnetic extension rod
Powerful grip for a secure fit
Bits stay put with no slip or wobble
With a ratcheting self-locking chuck.
Custom EVA storage case
Dedicated compartments for neat organisation
The case features a minimalist design and is crafted from durable EVA material, making it easy to clean.
Product details
LED light
Forward/Reverse/Lock button
Non-slip rubber-coated handle grip
Type-C charging
Wide selection of bits for you to choose from
Drill bit sets
①②③ Wood drill bits (Diameter: 4mm, 6mm, 8mm)
④ Multi-purpose drill bit (Diameter: 8mm)
⑤ Multi-functional ceramic drill bit (Diameter: 6mm)
⑥ Extension rod (Dimensions: 60mm x 10mm)
Screwdriver bit set
① Flat: SL4, SL5
② Torx: T15, T20, T25, T30
③ Pozidriv: PZ1, PZ2
④ Phillips: PH0, PH1, PH2, PH3
⑤ Square: S1, S2
⑥ Triangle: 2.3
⑦ Hex: H2, H3, H4, H5, H6
Notes:
1. Drill up to 200 holes: Tested using the wood board drilling method. The device was fully charged and set to High-speed mode with torque adjusted to level 30 in Manual ("M") mode. A 40mm-deep hole was then drilled into a white pine board using a 8mm wood drill bit.
2. Maximum output torque: Maximum torque may vary by ±5N·m due to different measurement devices. Torque test method: The device was fully charged, set to Low-speed mode, and a torque tester measured the locked-rotor torque at level 32. The measurement was repeated five times, and the highest value was recorded.
3. Maximum speed: Speed may vary by approximately 10% under no-load conditions. Speed test method: The fully charged device was run for 1 minute without a load, and a speed tester was used to measure the no-load speed.
4. Approximately 66% maximum torque increase from the previous model: Previous model refers to Xiaomi 12V Max Brushless Cordless Drill. The Mijia Brushless Cordless Drill 2 has a maximum torque of 50N·m, while the Xiaomi 12V Max Brushless Cordless Drill has a maximum torque of 30N·m. Calculated as (50−30) ÷ 30 × 100% ≈ 66%, the maximum torque shows an approximate 66% increase compared to the previous model. Maximum torque may vary depending on the usage environment. Please refer to the actual product.
5. Approximately 21% maximum speed increase from the previous model: Previous model refers to Xiaomi 12V Max Brushless Cordless Drill. The Mijia Brushless Cordless Drill 2 has a maximum speed of 1,700rpm, while the Xiaomi 12V Max Brushless Cordless Drill has a maximum speed of 1,400rpm. Calculated as (1700−1400) ÷ 1400 × 100% ≈ 21%, the maximum speed shows an approximate 21% increase compared to the previous model. Maximum speed may vary depending on the usage environment. Please refer to the actual product.
6. 1,900mAh high-capacity battery pack: The battery pack has a rated capacity of 1,900mAh. Data comes from Dongguan EMTEK Technology Co., Ltd. Test Report No.: EDG2506040039S00300R.
7. Approximately 600 screws: The device was fully charged and set to Low-speed mode with torque set to level 10 in Manual ("M") mode. An M4×25mm self-tapping screw was driven into a pine board repeatedly until the drill's battery was fully depleted.
8. Automatic mode: This mode is recommended for screwing into harder materials and is not suitable for drilling.
9. When drilling holes in ceramic tiles, apply water to the drill bit to keep it cool, enhance drilling efficiency and extend the bit's lifespan. Take proper protective measures before use.
10. Wet drilling is commonly used for materials such as ceramic tiles, marble and concrete (with a recommended maximum Mohs 6 hardness). Apply water before use to prevent the drill bit from overheating or getting damaged. Start in low-speed mode to position the drill and prevent slipping. Apply steady pressure during drilling to avoid excessive force that could cause the jam or break the bit.
*Unless otherwise indicated, comparisons mentioned on this page were made with Xiaomi products. Information on this page comes from manufacturer. Actual data may slightly differ depending on the test software version, the specific test environment, the specific version and industry measurement methods.
*The images on the page are for illustrative purposes only. Actual product effects (including but not limited to appearance, colour and size) and images (including but not limited to background, UI and illustrations) may vary slightly. Please refer to the actual product.